Contact Platform Support
Help CenterPCB Boards Transplanting Adhesive
Related Products
-
Thomas Silicon Steel Sheets AdhesiveNegotiableMOQ: 10 Kilograms -
Ceramics High Temperature Resistant AdhesiveNegotiableMOQ: 10 Kilograms
-
Transformer Potting AdhesiveNegotiableMOQ: 100 Kilograms
-
Moisture and Temperature Resistant AdhesiveNegotiableMOQ: 10 Kilograms
-
Thermally Conductive AdhesiveNegotiableMOQ: 10 Kilograms
Name |
High temperature resistant adhesive（THO4052） |
Outline |
It is double-component epoxy adhesive. It is easy and convenient to use for it cures fast at normal temperature and bonds well. |
Applications |
It is used to bond metals, the ceramics, compound materials working under the hot conditions. It also applies to stop up the leaks, the blocking of the cracks, and the perfecting of the castings, as well as the filling of electrical components or heating parts. |
Features |
Component A is the tinted thick liquid, non-solid particle. component B is in tinted paste shape. Fast curing speed. At 25℃, its surface cures during the first 3 hours, 18 hours later, it reaches its maximum bonding strength. Being durable and resistant to ultraviolet light once the bond has formed. Being heat-resistant, it adapts to a wide range of temperatures and bonds well under high temperature. Mix the two components in a certain proportion, apply it to the surface of the substrates directly, which makes it so convenient to use. You.ll get long term durability and resistance to moisture, chemicals, oils, and temperature extremes. Being stable, its storage time is half a year. The main technical parameters are as follows: Heat resistance scope：-40－+380℃ Cementation intensity: At Normal temperature: Tensile strength≥25MPa; Shearing strength≥20 MPa At 150℃: Tensile strength 3－5 MPa |
Instruction |
1. To get the best results, the two substrates being bonded should be free of oils, dirt, moisture and other contaminants, or the substrates should be slightly roughed or sanded to remove gloss. 2. Mix A and B in a proportion of 10:1 to get perfect bonding result. 3. Spread the mixture on the substrates, put them together and apply some strength on them, finally, let them dry for 2-4 hours. |
Notes |
1.The tools used to get adhesives should have exclusive usage. 2. It is necessary to keep it well ventilated and away from fire. 3.If it has contact with skin, you should wash thoroughly with soap and water. 4. It can be stored at well-ventilated places with low temperature, and keep them away from fire. Cover the lip after using it. |
Copyright © 2005-2019 Thomas Technology, Inc. All Rights Reserved.
Send Inquiry to This Supplier
You May Also Like
-
Thomas High Strength Structural Adhesive Bonding Carbide Cutting ToolsNegotiableMOQ: 10 Kilograms
-
Thomas High Temperature Resistant Adhesive Used in HEPANegotiableMOQ: 10 Kilograms
-
Thomas High Strength Structural AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas Temperature Shocks Resistant AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas High Temperature Resistant Silicon Steel Sheets AdhesiveNegotiableMOQ: 10 Kilograms
-
Thomas High Temperature Resistant Magnetic Motor AdhesiveNegotiableMOQ: 10 Pieces
-
Thomas High Temperature Resistant Electronic Components Encapsulating AdhesiveNegotiableMOQ: 1 Piece
-
Thomas High Temperature Resistant Adhesive for FiltersNegotiableMOQ: 1 Set
-
Thomas Magnet AdhesiveNegotiableMOQ: 1 Kilogram
-
Thomas Electronic Component Potting SealantNegotiableMOQ: 1 Piece
