Home > Products > Pillow Block Bearing > Heavy Load Pillow Block Bearing , UCP218 Self - Aligning Axle Ball Bearing
Heavy Load Pillow Block Bearing , UCP218 Self - Aligning Axle Ball Bearing
- 0 Metric Ton / Metric Tons per Month
- T/T L/C D/P D/A
- 7 days
- calcined petroleum coke/CPC/GPC for graphite electrode/steel plants/calcined petcoke
- carbon additive,carbon raiser,GPC for steel casting,iron casting
- graphitized carburant,carburizing agent,graphite petroleum coke,carbon raiser,GPC for steel casting
- graphitized recarburizer,carburizing agent,graphite petroleum coke,carbon raiser,GPC for steel casting
- graphitized recarburizer,carburizing agent,graphite petroleum coke,carbon raiser,GPC for steel casting
- low sulphur calcined petroleum coke/CPC/GPC for graphite electrode/steel plants/casting/metallurgy
Product Details
Brand Name: | ETR | Place of Origin: | China | Model Number: | UCP218 |
Product Description
Heavy Load Pillow Block Bearing , UCP218 Self - Aligning Axle Ball Bearing
Description:
ETR pillow Block bearing UCP218, heavy load Self-aligning
Pillow block bearing is a kind of bearing that looks like a small ball bearing that has a casting pedestal or a pressed steel plate and a double seal. If you will look closely inside it, you will see that the pillow block bearings is very much the same as the other kinds of bearing like the deep groove ball bearings. The only difference is that is you will look closely at the outer ring of the pillow block bearings, you can see that it has section balls which is best use with the concave part of the bearing pedestal.
Pillow blocks are usually mounted in cleaner environments & generally are meant for lesser loads of general industry. These differ from "plummer blocks" which are bearing housings supplied without any bearings & are usually meant for higher load ratings & corrosive industrial environments. However the terms pillow-block & plummer-block are used interchangeably in certain parts of the world.
Specification
Plummer block housing units UCP218 | |||
d | 90 mm | ||
L | 327 mm | ||
H2 | 200 mm | ||
A | 88 mm | ||
B | 96 mm | ||
H | 101,6 mm | ||
H1 | 33 mm | ||
J | 262 mm | ||
N | 27 mm | ||
N1 | 33 mm | ||
S1 | 56,3 mm | ||
m | 12,2 kg | Mass | |
P218 | Designation, housing | ||
UC218 | Designation, radial insert ball bearing |