Aluminium Cladding Panels / Aluminium Foil Heavy Duty 4% - 18% Cladding Rate

Delivery Time:30 working days after received your down payment
Certification:TS16949-2008

7072 5%,/8%/10%/12% 1060, 3003, 5052/4343, 4045, Aluminum cladded material for heavy duty 
1. Chemical compositions of cladded materials, core materials for welding heat exchangers
 
(1) Cladded Materials

Alloy	Si	Fe	Cu	Mn	Mg	Zn	Zr	Ti	code
4343	6.8-8.2	0.8	0.25	0.1	－	0.2	－	0.05	1
4343+1%Zn	6.8-8.2	0.8	0.25	0.1	－	0.5-1.5	－	0.05	2
4045	9.0-11.0	0.8	0.3	0.05	－	0.2	－	0.2	3
4045+1%Zn	9.0-11.0	0.8	0.3	0.05	－	0.5-1.5	－	0.2	4
4004	9.0-10.5	0.8	0.25	0.1	1.0-2.0	0.2	－	0.2	5
7072	0.7		0.1	0.1	0.1	0.8-1.3	－	－	6
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.5-1.0	－	0.03	7

 
(2) Core Materials

Alloy	Si	Fe	Cu	Mn	Mg	Zn	Zr	Ti	code
3003	0.6	0.7	0.05-0.20	1.0-1.5	－	0.1	0.05	0.03	1
3003+1%Zn	0.6	0.7	0.05-0.20	1.0-1.5	－	0.5-1.50	0.05	0.05	2
3003+1.5%Zn	0.6	0.7	0.05-0.20	1.0-1.5	－	1.0-2.0	0.05	0.05	3
3003+1.5%Zn+Zr	0.5-1.0	0.7	0.05-0.20	1.0-1.6	－	1.0-2.0	0.05-0.2	-	4
3003+0.5%Cu	0.6	0.7	0.30-0.70	1.0-1.5	－	0.10	0.05	0.1	5
3005	0.6	0.7	0.20-0.40	1.0-1.5	0.20-0.60	0.25	－	0.01	6

 
2. Mechanical properties

Alloy Code	temper	Tensile Strength Rm(MPa)	Yield Strength Rp0.2(Mpa)	Extend Ratio A50(%)
TR-010,TR-020,TR-030,TR-040,TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156 Etc.	O	95-135*	≥35*	≥15*
	H14	140-185	≥125	≥1.5
	H24	140-185	≥125	≥3.0
	H16	185-225	≥160	≥1.0
	H18	≥185	-	≥0.5
TR-166 Etc.tube material	H24	185-235	≥150	≥8
TR-116,TR-316 Etc.tube material	H14	140-185	≥125	≥3
	H24	140-185	≥125	≥8

Remark:“*”in the above table means tensile strength shall be 120-150Mpa,yield strength shall be ≥45Mpa,and elongation shall be ≥20% if the material of TR-050,TR-150,TR-151,TR-156 etc. with temper HO contain Cu..
Additional: We can manufacture special specifications according to customers' requests.
 
3. Production capability

	Width(mm)	Thickness(mm)	Length(mm)	Inside Diameters(mm)
Sheet	500-1070	0.5-5.0	500-2500	-
Strip	12-1070	0.2-3.0	-	150,200,300,400,500
Foil	12-1070	0.05-0.2	-	150,200,300,400,500

Composite ratio

4-18%(per side)

Percent Clad(per side)	4-8%	＞ 8-18%
Cladding tolerance	±1.5%	±2.0%

 
4. Our advantages
 
(1). Excellent reputation among Aluminum and Copper Areas;
 
(2). We have gained rich experience since 1988  in this industry;
 
(3). We have our own development department committed to new material research;
 
(4). Our processing begins from aluminum ingot, then we can control the quality as well;
 
(5). Ample experience and win-win cooperation with giant clients throughout the world;
 
(6). Fast production;
 
(7). With Certificate OHSAS 18001, ISO14001, and TS16949;
(8). High performance cost ratio;
(9). Good understandings and service, and acknowl