Contact Platform Support
Help CenterBlack Epoxy Two Components Encapsulating Adhesive for Module
Related Products
-
Silicone Encapsulating Glue for LEDUS$ 7 - 7MOQ: 220 Kilograms -
SMD Epoxy Red Glue for PCBUS$ 45 - 45MOQ: 100 Kilograms
-
Silicone Two Components Potting Adheisve for LEDUS$ 7.5 - 7.5MOQ: 440 Kilograms
-
Black Epoxy Two Components Potting Adheisve for MouldUS$ 7.2 - 7.2MOQ: 390 Kilograms
-
PCB Two Components Silicone Encapsulating AdhesiveUS$ 9.38 - 9.38MOQ: 220 Kilograms
Product Introduction
Ausbond 150 is a double-component black curable thermal-conductive & flame-retardant
Epoxy Encapsulating, with low adhesive and excellent flow and it can penetrate into the gap of products; it can be solidified through normal temperature or heating with suitable speed of solidification; there is no bubble with plain and glazing surface and high hardness; the solidified materials have an excellent performance of anti-alkaline, waterproof, oil- proof and dust-proof,which is humid and thermal resistant and air aging;
it owns excellent electric and physical features of insulation, anti-pressing and high degree of adhesive.
Typical Purposes
It is widely used for injection sealing protection and confidentiality of electronics of circuit module,power module, electronic component and PCB board.
Process Used
1. The product to be ejected should be dry and clean.
2. Group A and Group B should be fully mixed in separate container before mixture.
3. To weight correctively as per weight proportion and fully agitate it after proportional mixture to avoid the incomplete solidification.
4. Generally speaking, the pressure below 20mm can be free from bubble naturally; because the high temperature causes the faster speed or deeper of pressure depth, so the bubble can be free according to the requirement.The blender should be placed in the vacuum container in order to get rid of facial and internal bubble after the module
pressure; under 0.8MPa it should be free from bubble for at least 5 minutes.
5. The glue materials free from bubble should be poured into the products to be ejected; the ejected products can be solidified by normal temperature or heating.
6. Please keep the environment clean in the process of solidification in case of the admixture or dust falling on the surface of non-solidified glue liquid.
Package Specification
30kg/suite (group A 25kg+group B 5kg).
Storage and Transport
1. Store in the cool and dry place, with shelf life 12 months (25℃).
2. This product belongs to non-dangerous articles;please transport it as general articles.
3. For the product over storage life, please use it after confirming whether it is abnormal.
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale TPU Material 65A, 70A, 80A TPU Granule for Shoe Soles/Sole Air Cushion & Sports Equipment ManufacturingUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
