Home > Products > Mosaic Tile Adhesive > Kitchen Tile Gum Mosaic Tile Adhesive Heat Resistant For Outdoor
Kitchen Tile Gum Mosaic Tile Adhesive Heat Resistant For Outdoor
- 0 Cubic Meter / Cubic Meters per Month
- T/T L/C D/P D/A
- 7 days
Product Details
Brand Name: | Pinbang | Place of Origin: | China | Model Number: | PB-01 |
Product Description
Certification:IS09001:2000
Kitchen Tile Gum Mosaic Tile Adhesive Heat Resistant For Outdoor
The product is a new type strong adhesive, applied to indoor and outdoor wall paste of large-scale ceramic tile, grassing stone, natural stone material, modifies epoxy glue with features of strong adhesive strength, low stress, low dilatability, no bubble, quick set, proper viscosity and easy operate, resistant of grind, aging, cold-hot exchange.
Product Description
Product features:
1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.
2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.
3. Has strong water retention, no need to DIP tiles and wet walls, thin construction, easy operation, to reduce material consumption and building load.
4. Has good flexibility to resist effectively the destruction of various stresses.
5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.
6. It is no-toxic, no-radiation, no smell and environmental.
7. Has special formula to prevent the flow with too much southbound crash, easier construction.
Treatment of base plane:
1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.
2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.
3. New plastering cement mortar could be constructed after 14 days maintenances.
Construction technology:
1. Construction tools: Leveling instrument, dentiform drawknife (3×3mm, 4×4mm, 6×6mm, 8× 8mm, 10×10mm), tile generator, motor stirrer, big drum, cross-colloidal.
2. Stir and mix: Mix tile adhesive and water as 20: (5~6.5) stirs completely and waiting for 5 minutes, stir again.
3. Layup construction: Scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.
Attentions:
1. The vertical and smoothness of the substrate must be confirmed before construction.
2. The product is suitable for construction in the 5℃~40℃.
3. Don\'t use the dried paste by reading water.
4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
Technical parameters:
Original tensile adhesive strength(Mpa) |
≥1.0 |
Tensile adhesive strength after water(Mpa) |
≥1.0 |
Tensile adhesive strength after thermal aging(Mpa) |
≥1.0 |
Tensile adhesive strength after thawing cycle(Mpa) |
≥1.0 |
Tensile adhesive strength after standing for 20 min(Mpa) |
≥1.0 |
Contact Us
- Pinbang Building lndustrial LTD
- Contact nameMr. Joe Yuan
- Phone86-020-32026839
- AddressRoom A601, Yangcheng Garden, Zhongshan Avenue, Tianhe District, Guangzhou ,China. Weifang,Shandong
Bathroom Tile Grout | Ceramic Wall Tile Adhesive | Exterior Wall Putty | Interior Wall Putty |
Mosaic Tile Adhesive |
- Golden green foam ceramic partition board, tube well board, lightweight foam ceramic board, sound insulation, fire prevention foam ceramic board
- Gold Green energy foamed ceramic outer wall board supply external wall ceramic foamed board large board roof exterior wall building partition board
- Golden green foam ceramic lines, components, self built villa exterior wall decoration lines, light luxury lines
- Golden Green Energy supplies foamed ceramic hollow Concrete masonry unit foamed ceramic component lightweight porous art modeling partition hollow
- Green Energy Material foam ceramic relief carving decoration, garden garden decoration, hanging accessories, villa wall, shadow wall
- Granite ceiling cornice frame moulding,granite flooring border design
- Granite frame moulding
- Marble stone carved Ceiling moulding
- White marble flooring border designs
- Real Wood Plantation Shutter components Made of Paulownia/Poplar/radiata pine/plywood
- FSC Pine architraves 18mm solid wood baseboard moulding
- Polypropylene Fishing String
- New Composite Board PS Plastic Spa Skirt Panel Hot Tub Board Acrylic Massage Bathtub Spa pool wooden SPA PS skirting boards
- New Composite Board PS Plastic Spa Skirt Panel Hot Tub Board Acrylic Massage Bathtub Spa pool wooden PS Skirting Boards
- Eco-friendly PS Material Hot Tub Decorate Part PS Polystyrene Wood
- Architectural model of Dubai amusement park, UAE, smart city model
- Architectural model making of Dubai Planetarium, UAE
- size and color can be custom-made steel concrete stackable block lego molds of interlock
Popular Searches
Find Similar Products By Category
- Construction & Real Estate > Mouldings
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. Joe Yuan
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-