Hot Sale Jigger Used for Gravity Dressing Line
Jigging machine
Jigging machine beneficiation is one way of gravity beneficiation. It belongs to deep trough separation operations,use water as processing media, it depends on the difference of specific gravity between the mine to be select and gangue to separate mine, They are mostly in septum tpye,the stroke and time of stroke is adjustable depend on different specific gravity of mine,it’s widely used to select Tungsten, tin, gold, red iron, brown iron, manganese, titanium, antimony, lead, tantalum, niobium and other metal.
Jigger machine belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Hongsheng saw-tooth wave jigger is mainly consisting of three parts: main frame, driving set and jigging chamber.
Application
Jigger machine is widely used in gravity concentration of tin, tungsten, placer gold, hematite ore, manganese, titanium, antimony, lead, tantalum, niobium and other minerals.
Features
The pulsing curve of the traditional jig is sinusoidal waveform, the up and down speed of water flow and acting time produced by the movement of membrane are almost the same, so it is unfavorable to loose of jig bed and layering of minerals based on special gravity, and thus affect separation ability and recovery rate. Saw-tooth wave is energy economy gravity equipment that is developed and improved from traditional jig on the basis theory of jig bed layering. Its jigging pulsating curve is similar to saw-tooth wave, which makes the up speed of water flow quicker than down speed of water flow, so it can improve looseness of jig bed and reduce suction action, which can lead to fully settlement of heavy particles in slurry; it highly improves separation ability and recovery rate. Stroke and frequency of stroke are adjustable.
Main technical parameter:
|
Type
|
Model |
Jig room cross section |
Jig room length and width |
Jig room area(m2) |
Columns |
Jig room numbers |
Jig room total area(m2) |
Stroke factor |
Membrane stroke(mm) |
Membrane stroke(times/mm) |
Max. feeding size(mm) |
Process(T/h) |
Water consumption(T/h) |
KW |
|
Side-action |
LTP-34/2 |
Rectangle |
450*300 |
0.135 |
Single |
2 |
0.27 |
0.58 |
0-25 |
320-420 |
12 |
2-6 |
4-10 |
1.1 |
|
Next-action |
LTA-1010/2 |
Rectangle |
1000*1000 |
1 |
Single |
2 |
2.0 |
0.5 |
0-25 |
250-350 |
5 |
5-15 |
10-20 |
2.2 |
|
Side-action |
LTC-366/8T |
Rectangle |
900*600 |
0.54 |
Single |
2 |
1.08 |
0.56 |
0-25 |
220-300 |
12 |
6-9 |
40-60 |
1.5 |
|
Side-action |
2LTC-6109/8T |
Trapezoidal |
600*(300-600) |
0.2-0.34 |
Double |
8 |
2.16 |
0.68-0.41 |
0-25 |
120-300 |
5 |
3-6 |
20-40 |
1.1*2 |
|
|
|
Trapezoidal |
900*(600-1000) |
0.58-0.86 |
Double |
8 |
5.76 |
0.52-0.35 |
0-25 |
120-300 |
5 |
10-20 |
80-120 |
2.2*2 |
Send Inquiry to This Supplier
You May Also Like
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
Drum Wood Shredder Tree Branches Wood Chips for Mulch & FuelNegotiableMOQ: 1 Set
-
High Efficiency Energy Saving Fluidized Bed Dip Powder Coating Equipment Eco Friendly for Refrigerator ShelvesUS$ 2000 - 40000MOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
-
Factory Supply Stainless Steel Sheet Polishing MachinesUS$ 2,000 - 5,000MOQ: 1 Set
-
Cheap Copper Wire Scrap 99.99 Recycling MachineUS$ 13,000 - 16,999MOQ: 1 Set
-
High Output Recycling Copper Wire Machine/Wire Recycling Machine/Copper Wire Recycling MachineUS$ 2,000 - 15,000MOQ: 1 Set

