White EPDM Foam Anti Vibration Material With Enhanced Aluminum Foil

Delivery Time:7-15 working days
Certification:CE

8.5mm Thick Self Adhesive EPDM Foam Enhanced Anti Vibration Material With Aluminum Foil

Specifications:

Model	ZZXY-11 EPDM Foam Enhanced Anti Vibration Material
Alumnium Color :	Silver
Raw Material :	1.5mm Thick Butyl; Foil; 7mm Thick EPDM
Butyl rubber Color :	Black
Surface :	EPDM light yellow foam ; Foil with Square surface
Foam Rubber :	EPDM
Release Paper :	Yellow ; White ; Brown
Thickness :	8.5mm; (1.5mm Butyl + 0.05mm foil + 7mm foam);334mil
Size :	500 mm X 800 mm; 18”x31.5” ( Accept customerization)
Weight:	1.65kg/sheet
Packaging(Recommend) :
Door Kits	4 pcs / pack ; 5 packs / Carton
Bulk Kits	9 / 10 pcs / Pack ; 2 packs / Carton
Normal Packaging	20 pcs / Carton

Description:

ZZXY-11  8.5mm Thick Self Adhesive EPDM Foam Enhanced Anti Vibration Material With Aluminum Foil is

an enhanced material Constructure: releasing liner + self adhesion butyl rubber based +silver foil faced

EPDM It mainly used for vibration damping, reducing car engine noise, wheel noise, road noise, wind

noise ,improve car audio sound quality.

Features:

• Easy-to-install, very high-strength adhesive butyl rubber

• Eliminate body/floor vibration

• Better audio sound quality

• Good to160℃

• Water proof, fire proof

Application

Transportation:

It can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet

metal is cleaned before painting (typically at the sealer application operation). is used to treat metal

panels, partitions, ducts, doors, bins, panels, and so forth in railroad cars, buses, automobiles, and ships.

It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer

equipment, machine tools and many other objects that suffer from vibration-produced noise.

Installation

Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner.

Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the

release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest

edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving

air pockets, which reduce sound damping capacity. The temperature of the mat and application surface

should not be below room temperature during fitting. Heating the material is not necessary.

Our products competitive

Increases SPL

Improves Bass Quality and Reduces Bass Distortion

Kill unwanted noise, rattles, vibrations

Reduce exhaust and engine noise

Full car installation reduce noises 5-8 dB

Temperature range of -60 degree ~160 degree

Service life:7-8years