Semi Open Cell Foam Sound Absorbing Material High Strength Adhesive

Delivery Time:7-15 working days
Certification:CE

Semi Open Cell Structure Foam Rubber Vehicle Sound Absorbing Material with High - Tick Self Adhesion

Specifications:

Model	GY-02
Raw Material :	Foam rubber with adhesion
Foam Color :	Black
Release Paper :	Yellow ; White ; Brown
Thickness :	3-50mm(118mil-2000mil) (Accept customerization)
Size :	500mm X 800mm;19.6”x31.5” ( Accept customerization)
Weight:	0.3kg/pcs
Warranty	1 year
Packaging:
Door Kits	4 pcs / pack ; 5 packs / Carton
Bulk Kits	9 / 10 pcs / Pack ; 2 packs / Carton
Normal	30 pcs / Carton

Description:

GY-02 High - Tack Black Color Close Cell Structure Foam Rubber Sound Insulation Material

which is self-adhesive material that can reduce vehicle engine noise, wheel noise, road noise, wind noise heat and improve car audio sound quality.

Features:

1, Easy-to-install, very high-strength adhesive butyl rubber

2, Increases SPL

3, Eliminates sound leakage!

4, Improves Bass Quality and Reduces Bass Distortion

5, Reduce exhaust and engine noise

6, Full car installation reduces unwanted noises 5-8 dB

7, Temperature range of -60 degree ~160 degree

8, Service life:7-8years

Areas for application

Can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). is used to treat metal panels, partitions, ducts, doors, bins, panels, and so forth in railroad cars, buses, automobiles, and ships.

Also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-produced noise.

Others,used for building construction, electronic industry, machinery, steel furniture, home appliances noise.

Installation

Use scissors, knife or die to cut the mat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.

Our products competitive

• Easy-to-install, very high-strength adhesive butyl rubber

• Eliminate body/floor vibration

• Better audio sound quality

• -60℃- 160℃

• Water proof, fire proof material