Precision electric socket_ connector mold with 1+1 cavity-200 sets different precision connector mold making experience.

Precision electric socket_ connector mold with 1+1 cavity-200 sets different precision electric connector mold making experience.
Precision socket connector mold,since the huge quantity required and product structure limited,is not very easy for mold design and manufacturing.
If somebody with not rich building experience will be in trouble during mold making and mass production.

Product structure characteristic:
1)2 kiss-off hole at each side,the length is more than 65mm,and the max. section size is only 40x22mm.
2)there is no any releasing draft on the side wall,for some long connector,there will be 0.2° allowance around the kiss-off hole.
3)the top tolerance is 0.02mm,there is no flash and no shrinkage and no any deformation allowance on the part.
4)the raw plastic material is PA6+30%GF or PC+ABS(expensive PC+ABS)

Since above mentioned characteristic,there will be very serious consideration during mold design:the gating location and cooling
system arrangement is key point to success.Also how to guarantee the stable and smooth movement for the slider and mold base
during molding,you have to choose right steels and mold standard parts and also make them at right hardness.JK-MOLD take a
rich experience in such kinds of precision connector mold making and can give you more confidence for you to put the order to us.

Artical come from JK-MOLD.website is