200kva 3phase thyristor type voltage regulator/stabilizer

Capacity/Power: 200KVA

Input Voltage Range: 380VAC ± 20%

Output Voltage: 380VAC ± 3%

Working Frequency: 50/60Hz

Response Time: ≤10ms

Efficiency: ≥98%

Overload Capacity: 5 times of rated output current, last for 1 second

Duty Cycle: Continuous

Transformer Winding Material: Al (Aluminum)

Insulation Class: F

Bypass System: Automatic bypass and internal manual bypass

Voltage Regulation Mode: Regulation on each phases individually                                        

Ambient Temperature:-15°C to +45°C

Altitude: ≤1000m

Relative Humidity:0-95% (Non-condensing)

Insulation Resistance: ≥2MΩ

Breakdown Strength: No damage at 2000V for 1 minute

Waveform Distortion: Nil

Output Waveform: Pure sine wave, does not change the input signal

Acoustic Noise: ≤50dBA

Display: LCD screen

Protection: Input Circuit Breaker, Automatic Bypass or Cut Off Output (Phase Loss/Failure, Incorrect Phase Sequence, Overload, Over Voltage, Under Voltage, Short Circuit), Fuse for Each Phase

Installation: Indoor and floor mounted

Protection Degree (IP Rating): IP20