Contact Platform Support
Help CenterDrilling Milling Spindle Motor , Grease Lubricating Internal Grinding Spindles
Related Products
-
High Torque Electric Motor 8A , 3.2kw High Frequency Spindle For Milling MachineUS$ 4 - 5MOQ: 1 Piece -
Low Rotating Speed High Torque 3.5kw High Frequency Machine Tool Spindles 110-9-21ZUS$ 4 - 5MOQ: 1 Set
-
380V 9000 - 1800rpm 4.5kw High Frequency Spindle for CNC Milling Machine 120-9-18ZUS$ 4 - 5MOQ: 1 Set
-
Low Noise Little Vibration High Frequency Spindle 800Hz Water CoolingUS$ 4 - 5MOQ: 1 Piece
-
CNC High Frequency Motorized Spindle 5.5kw Water Cooler Spindle Motor For Metal CutUS$ 4 - 5MOQ: 1 Square Meter
Certification:CE,FCC,MSDS
Drilling Milling Spindle Motor , Grease Lubricating Internal Grinding Spindles
Warranty:
We offer one years warranty. Within warranty period, all exchanges or repairment due to defects are free (Buyer is responsible for shipping charges).
Specifications:
Electric current: 8A Voltage: 380V
Spindle mode: NYM100-9-24Z/3.0
Spindle parametric: Overall size(mm):
Frequency: 800Hz D: 100
Rotating speed: 9000-24000rpm D1: 78
Power: 3.0Kw L: 220
L1: 37
L2: 31
Connect mode: ER20
Tool holder’s diameter: 1-13mm(Factory standard: 2 fillings)
Taper hole of spindle runout: ≤0.003mm
Mandrel runout: ≤0.008mm
Lubricating mode: grease
Cooling mode: water
Bearings mode: 2*7005 2*7003
Weight: 13KG
Description:
Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed. Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance The GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability. Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary. . The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.
Applications:
Applicable scope: the circular carving and drilling and milling of the hardware This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for, glassworks and woodworks.
Product features:
1, Low noise, little vibration, good stability, high processing precision
2, Infinitely variable speed transmission for frequency changer with wide speed range
3, Adopt the ceramic core Aerial plug, more safe and reliable
4, Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; High rotating speed used for engraving and milling or fine machining. This product has wide application.
5, The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better. The durable years of the Bearings gets more longer.
After-sale protection:
Bearing warranty last for half a year,Machine quality assurance last for a year.
Notes for Use of Motor Spindle:
1, Coolant must be clean and free of grease. Temperature should be controlled in 5 to 30 degrees. If the ambient temperature is above 30 degrees, the cooling medium must be forced to cool. Precision machining machine requires coolant temperature at 20 degrees positive or negative 2 degrees.
2, In the process of saving and transporting motor spindles, the high speed grease in the bearings could be changed. So before using, the spindles should run in low speed for a period time at first. Running must start from the minimum speed of the spindle and add speed to differential growth by 3000rpm after 30 minutes. Each level is run in 20 minutes. If just start using in high speed without running, abnormal noise and heat would happen then the using life will be shortened. In the long-term use of the electric spindle, it should be working(in low speed) at least 15 to 30 minutes within one week.
3, When stored clamping tool on electric spindle, the collet , nut and tapered bore must be cleaned to ensure accuracy. The hilt is inserted into the collet must be greater than 15 mm.
4, The motor spindle must be preheated before processing every day. Until reaching the processing speed and running for 15 to 20 minutes, the spindle could start fine finishing. The spindle should stop 2 hours to prevent mechanical fatigue every day, so as to prolong the life.
5, Knock on the spindle end cover, collet and cutterhead when remove bit is forbidden. No bump in the process of saving, transporting and using motor spindles especially the end cover.
Send Inquiry to This Supplier
You May Also Like
-
Gravity Separation 6-S Shaking TableNegotiableMOQ: 1 Set
-
All Kinds of Mining Machinery and Wide-Body Mining Trucks, Mining Dump Truck, ExcavatorNegotiableMOQ: 1 Set
-
Excavator 3ton Crawler Mini Digger With Hydraulic ThumbNegotiableMOQ: 1 Set
-
Bimetallic Hardfacing Cladding Wearable Liners With Perfect Abrasion ResistanceUS$ 120 - 120MOQ: 1 Square Meter
-
Track Mini Excavator for Sale 2 Ton 2.5 3 Ton 5 Ton Small Rubber China Cheap Price 0.6 Ton 0.8 Ton 1 Ton 1.5 Ton 1.7 Ton 175mmNegotiableMOQ: 1
-
Essential Vibrating Bowl Feeder/vibrating FeederUS$ 9,700 - 10,000MOQ: 1 Set
-
Drilling Fluid Cyclone DesanderNegotiableMOQ: 1 Set
-
Ceramic Particle Production Line With ISO9001:2008 CertificateUS$ 5,000 - 50,000MOQ: 1 Set
-
Hot Sell High Frequency GTS Series Drum ScreenUS$ 500 - 40,000MOQ: 1 Set
-
China New Design Vibration PlatformUS$ 500 - 6,000MOQ: 1 Set
