800H Arch Marine Rubber Fender With High Performance , IT-Type

Delivery Time:Within 45 days
Certification:PIANC,SGS，BV，CCS，ISO90001
800H Arch Marine Rubber Fender With High Performance , IT-Type

Quick Detail:

Rated deflection can up to 57.5% with higher energy absorption. The frontal frame with UHMW-PE can lower friction factor and the shear strength while vessel berthing and raise fender service life. Material:NR,EPDM,SBR,etc. Various length or size can be obtained according to the actual situation. The largest size can up to 2000H.

Specifications:

Compounds	High reaction force (P1)	Standard reaction force (P0)
Specification Performance	Reaction force(KN)	Energy absorption(KN-M)	Reaction force(KN)	Energy absorption(KN-M)
TD-IT800H	428	157	299	110

Length:1000mm

Note: Rated deflection 57.5%

Tolerance:±10%

Competitive Advantage:

1.  The design compress deformation is 57.5% and its energy absorption is around 10% higher than that of super arch (TD-B) fender.
2.  Small installation scale provides it broader application range. TD-B500H fender\'s mounting bolt center distance is 840mm, much shorter than 600mm owned by TD-IT500H.
3.  It enjoys facile design, suitable for vertical, horizontal as well as mixed arrangement.
4.  The front part is fixed with frontal frame and pressure on fender face can be set according to specific need.

Description:

Good angular performance Wide range of sizes High efficiency PIANC tested and certified Modular design

IT-type rubber fender provides a compact solution to mounting fenders in limited areas. IT-type rubber fenders have a narrower footprint than traditional leg fenders. They can be mounted behind a panel or pile.
 

Applications:

IT-type rubber fender have a long track record and are well suited to berth and terminals handing all vessel sizes.IT-type rubber fender can be used in arrays with frontal frame ,or it can also be used with a UHMW-PE shield to provide a low cost alternative to an arch fender.