Contact Platform Support
Help CenterSell Variable Force Spring Pipe Hanger
Related Products
|
Grade |
Load Range |
Weight T1 |
Weight T2 |
Weight T3 |
Weight T4 |
Weight T5 |
|
|
T1
T2
T3
T4
T5
|
101 |
20-50 |
2.06 |
2.26 |
1.69 |
3.38 |
9.06 |
|
102 |
30.8-77 |
2.94 |
3.15 |
2.50 |
4.19 |
15.55 |
|
|
103 |
47.8-118 |
3.11 |
3.32 |
2.67 |
4.36 |
15.89 |
|
|
104 |
72.8-182 |
5.33 |
5.54 |
5.05 |
7.28 |
20.00 |
|
|
105 |
112-280 |
5.91 |
6.11 |
5.62 |
7.85 |
21.14 |
|
|
106 |
175-375 |
11.38 |
11.50 |
8.57 |
12.71 |
33.34 |
|
|
107 |
233-500 |
12.45 |
11.45 |
9.43 |
13.57 |
35.29 |
|
|
108 |
311-666 |
15.78 |
16.34 |
13.53 |
19.34 |
43.86 |
|
|
109 |
414-888 |
18.01 |
19.56 |
14.72 |
24.53 |
51.53 |
|
|
110 |
551-1180 |
26.39 |
27.43 |
22.72 |
29.58 |
78.64 |
|
The pipe useful is widely
A, purpose and principles
Spring is mainly used for power from boiler steaming-water pipe or equipment and operation in the thermal displacement and equipment. According to the calculation of stress pipe rack and hot springs, the factory will spring displacement requirements in accordance with the design load on a hanger setting: spring preloading and by the cold load position, Also on the cold when the theoretical work position.
Spring rack manufacturer in the factory before setting, when installed to pipe and equipment and related threads after adjustment, which will DingXiao opened at the actual load, spring is design requirement of cold load.
Second, type, type
Variable type spring rack has four series, is mainly composed of northwest power design institute of design T1, T2 and T3, and T4; T5 type series, east China power design institute of design, TH3 TH1 TH2, type series, TD series (JB/J8130.2-1999) and chemical design, the design of the series VS series, bearing the same basic characteristics for 20daN - 21000daN. Main structure, bearing type suspensory supporting type and parallel suspension.
(3), T, TH structure form and model method:
The pylon according to installation forms into middle connection hanger spring TH 1 connected and hanger spring TH 2, 3 three stent spring TH models.
TH 1 again into A, B and C three types,
TH 1 for A single ears (T1) connected hanger spring,
TH 1 B (T2) for both ears connection hanger spring,
TH 1 C for thread connecting hanger spring,
The three types of spring, mainly used for hanging on the floor, steel, duct girder.it.
TH 2 (T3) applies to install in steel,
TH 3 (T4) mainly used in steel, based on the floor;,
T5 parallel suspension type.
(4), VS, TD structure form and model method:
Variable spring rack main cylindrical helical spring, displacement of instructions, shell and firmness nuts parts.
Variable spring rack, according to the different methods of installation into A, B, C, D, E, G F, seven types.
Type A, type hanging on the thread,
Type B - single ears hanging type,
C - ears hanging type,
Type D aside; adjust on --
E. adjusting aside; under the -
F type, type aside,
G -- paralleling suspension type
Send Inquiry to This Supplier
You May Also Like
-
DIN ANSI BS JIS GOST Flanged End Rubber Expansion Joint Pn10 Pipe Ball Type Connector Used for ConnectionUS$ 18.00 - 20.00MOQ: 10 Pieces -
Industrial Grade Stainless Steel Pipe Welded Tee, Corrosion Resistant for Chemical Industry UseNegotiableMOQ: 100 Pieces
-
Concentric Reducer 8 Inch X 12 Inch Butt Weld Sch 40 316 Concentric Reducer Connected With Steel PipeNegotiableMOQ: 1 Piece
-
High-Performance Nickel Alloy Reducer Compatible With Various Pipe Systems in N10276NegotiableMOQ: 10 Kilograms
-
Three-Way Pipe TeeNegotiableMOQ: 2700 Pieces
-
Pipe Fitting Wide Flange Tapered Plastic Anti-dust Proof Hydraulic Hose Swivel Ends Cap PlugNegotiableMOQ: 100 Pieces
-
High-Pressure Hydraulic Hoses and Fittings for Robust Industrial ApplicationsNegotiableMOQ: 1 Set
-
HVAC Air Conditioner Nut Fitting Coupling Connector Adapter Copper Refrigeration Forged Flare Brass Flare UnionNegotiableMOQ: 1
-
Rubber Grease Nipple CapNegotiableMOQ: 1
-
Shouldered Coupling for Fire Fighting SystemUS$ 1.5 - 1.5MOQ: 1000 Kilograms
