QVC Series Pneumatic Vacuum Feeding Machine High Precision , GMP
Certification:ISO 9001:2000
QVC Series Pneumatic Vacuum Feeding Machine High Precision , GMP
Description:
Vacuum feeder is a vacuum conveyor that uses pneumatic vacuum pump as vacuum source. With this vacuum feeder materials could be fed directly from container into mixer, reactor, hopper, tablet press, packing machine, vibration sieve, straightening granulator, wet granulator, dry granulator and disintegrator. Using this feeder, workers’ labor intensity could be reduced, the dust pollution will be eliminated and ensure that the production conforms to the requirement of GMP.
When press down the switch of “ON/OFF”, the compressed air will enter into the vacuum pump, simultaneously under the push of air cylinder, the emptying door of hopper will be closed and the vacuum will be formed in the hopper. The vacuum feeding machine forms air stream under vacuum state. Under the action of this air stream the material which is conveyed will be transported to vacuum hopper through hose. Certain time later (feeding time, adjustable), the compressed air is closed, the pneumatic vacuum pump is unable to produce vacuum, simultaneously under the push of air cylinder the emptying door of hopper will be opened and the vacuum will be disappeared in the vacuum feeder. The material will be fed into receiving equipment from the emptying door (for example tablet press, packing machine and so on), simultaneously, compressed air that stores up in air packet\'s blowbacks the filter, and the filter cleans by itself. Certain time late (discharging time, adjustable), the compressed air starts again, the pneumatic vacuum pump will form vacuum, and emptying door of hopper will be closed. The vacuum feeder will feed material again. Move in cycles, the material is fed into the equipment continuously.
For the vacuum feeder with material level controller, automatic feeding of material in the hopper of the material receiving equipment can be realized through material level controller. When the material level is higher than certain position in the hopper of the material receiving equipment, the vacuum feeder stops feeding, when the material level is lower than certain position in the hopper, vacuum feeder starts feeding automatically. And feeding for the material receiving equipment is completed.
Specifications:
|
Model |
Conveying Capacity (kg/h) |
Consumed Air (L/min) |
Pressure of Supplied Air (MPa) |
|
QVC-1 |
350 |
180 |
0.5-0.6 |
|
QVC-2 |
700 |
360 |
0.5-0.6 |
|
QVC-3 |
1500 |
720 |
0.5-0.6 |
Competitive Advantage:
a vacuum conveyor that uses pneumatic vacuum pump as vacuum source conforms to the requirement of GMP. with material level controller
Send Inquiry to This Supplier
You May Also Like
-
Transmission ChainNegotiableMOQ: 2500 Meters
-
304 Stailess Steel Short Pitch Roller Chains 04B-1US$ 0.5 - 3MOQ: 100 Meters
-
The New Orange Square Flannelette Plastic Bead Wire Clothing Decorative Chain AttachmentUS$ 0.1 - 0.4MOQ: 1000 Meters
-
Chain LinkUS$ 1 - 100MOQ: 20 Tons
-
Acetal Case Chain 1400NegotiableMOQ: 100 Meters
-
Conveyor ChainUS$ 1.6 - 2.5MOQ: 2 Pieces
-
Anti-sidebow Chains 08AF6/415BF4/08BSSF20 Pitch 12.700mmUS$ 1.6 - 26.3MOQ: 500 Meters
-
Oilfield ChainNegotiableMOQ: 1
-
All PVDF Material,All PP Material,Plastic Chain,Pitch 12.7mm,Good Acid and Alkali ResistanceNegotiableMOQ: 1 Meter
-
Supply of Tsubaki Stainless Steel Chains From Japan, Agent of Tsubaki Chains by Guangzhou Longde ChainsNegotiableMOQ: 0 Piece