High Efficiency Vacuum Feeding Machine With Pneumatic Vacuum Pump
Certification:ISO 9001:2000
High Efficiency Vacuum Feeding Machine With Pneumatic Vacuum Pump
Description:
Vacuum feeder is a vacuum conveyor that uses pneumatic vacuum pump as vacuum source. With this vacuum feeder materials could be fed directly from container into mixer, reactor, hopper, tablet press, packing machine, vibration sieve, straightening granulator, wet granulator, dry granulator and disintegrator. Using this feeder, workers’ labor intensity could be reduced, the dust pollution will be eliminated and ensure that the production conforms to the requirement of GMP.
When press down the switch of “ON/OFF”, the compressed air will enter into the vacuum pump, simultaneously under the push of air cylinder, the emptying door of hopper will be closed and the vacuum will be formed in the hopper. The vacuum feeding machine forms air stream under vacuum state. Under the action of this air stream the material which is conveyed will be transported to vacuum hopper through hose. Certain time later (feeding time, adjustable), the compressed air is closed, the pneumatic vacuum pump is unable to produce vacuum, simultaneously under the push of air cylinder the emptying door of hopper will be opened and the vacuum will be disappeared in the vacuum feeder. The material will be fed into receiving equipment from the emptying door (for example tablet press, packing machine and so on), simultaneously, compressed air that stores up in air packet\'s blowbacks the filter, and the filter cleans by itself. Certain time late (discharging time, adjustable), the compressed air starts again, the pneumatic vacuum pump will form vacuum, and emptying door of hopper will be closed. The vacuum feeder will feed material again. Move in cycles, the material is fed into the equipment continuously.
For the vacuum feeder with material level controller, automatic feeding of material in the hopper of the material receiving equipment can be realized through material level controller. When the material level is higher than certain position in the hopper of the material receiving equipment, the vacuum feeder stops feeding, when the material level is lower than certain position in the hopper, vacuum feeder starts feeding automatically. And feeding for the material receiving equipment is completed.
Specifications:
|
Model |
Conveying Capacity (kg/h) |
Consumed Air (L/min) |
Pressure of Supplied Air (MPa) |
|
QVC-1 |
350 |
180 |
0.5-0.6 |
|
QVC-2 |
700 |
360 |
0.5-0.6 |
|
QVC-3 |
1500 |
720 |
0.5-0.6 |
|
QVC-4 |
3000 |
1440 |
0.5-0.6 |
|
QVC-5 |
6000 |
2880 |
0.5-0.6 |
|
QVC-6 |
9000 |
4320 |
0.5-0.6 |
Competitive Advantage:
a vacuum conveyor that uses pneumatic vacuum pump as vacuum source conforms to the requirement of GMP. with material level controller
Send Inquiry to This Supplier
You May Also Like
-
A4VG Hydraulic Pump Shaft Bearing for Repair A4VG56 Rexroth Pump Piston Pump Big Bearing Deep Groove Clutch Release BearingUS$ 45.59MOQ: 2 Pieces
-
6202 Manufacturer Wholesale Single Row Deep Groove Ball Bearing 15x35x11mmNegotiableMOQ: 1
-
Deep Groove Ball HRB BearingUS$ 0.1 - 10MOQ: 1 Piece
-
ACB336 Angular Contact Headset Bearing 1-1/8" 30.15x41x6.5mm 36/45 DegreeUS$ 1.5 - 1.5MOQ: 100 Pieces
-
Barnroom Sliding Shower Door Roller u Groove WheelUS$ 0.1 - 100MOQ: 50 Pieces
-
CR High Performance Deep Groove Ball Bearings 6804JVB/60 62 63 64 68 69SeriesUS$ 0.2 - 5MOQ: 300 Pieces
-
Crazy Hand Spinner Toys W01A282US$ 0.5 - 2MOQ: 100 Sets
-
High Quality and Competitive Price Ndc Engine BearingUS$ 0.1 - 100MOQ: 1000 Pieces
-
Water Pump BearingUS$ 10 - 50MOQ: 200 Sets
-
Supply Main Bush BearingUS$ 0.1 - 10MOQ: 500 Pieces