Contact Platform Support
Help CenterPolyethylene Tapes
Related Products
The T-300 series is cold applied tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems
T-300 Joint Tape (Polyethylene Tapes, Polyethylene Protective Tape, Polyethylene Tape & Primer) Series Coating Systems with AWWA C-214 Standard:
|
Type of the tape |
T-365 |
T-380 |
T-3100 |
T-3130 |
||||
|
Thickness (ASTM D 1000) |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
|
0.64 |
25 |
0.76 |
30 |
1.02 |
40 |
1.27 |
50 |
|
|
Tensile: |
31 lbs/in |
31 lbs/in |
41 lbs/in |
52 lbs/in |
||||
|
Length: |
40 Meter |
30 Meter |
25 Meter |
20 Meter |
||||
|
Width: |
2, 3, 4, 6, 9,12 |
|||||||
|
Colour: |
Black, White, Red, Blue, Purple, etc. |
|||||||
|
Elongation: |
300% |
|||||||
|
Peel Adhesion to Prime Pipe: (ASTM D 1000) |
230 oz/in, 25N/10mm |
|||||||
|
Cathodic Disbandment: (ASTM G8) |
0.25 in radius 6.4 mm |
|||||||
|
Water Vapor Transmission Rate: (ASTM F1249) |
0.2g/100in2 /24h, 0.3mg/cm2/24h |
|||||||
|
Water Absorption: (ASTM D570) |
≤ 0.1 |
|||||||
|
Volume Resistively: (ASTM E257) |
2.5 X 1012 ohm·cm |
|||||||
|
Dielectric Strength: (ASTM D 149) |
40 KV |
|||||||
|
Temperature Range: (Normal in Ground Service) |
-30 to 160 oF, -34 to 71oC |
|||||||
Send Inquiry to This Supplier
You May Also Like
-
High Performance Polyphenylene Sulfide Insulating Material A610M X03 PPS With High Toughness and High FillerUS$ 3 - 4.5MOQ: 1 Kilogram -
Low Temperature Resistance Enhanced Impact Resistance Thermoplastic Elastomers in POE 8842 Toughened PP PEUS$ 1.02 - 1.08MOQ: 5000 Kilograms
-
Wear Resistance Impact High Elasticity Injection Molding Grade Plastic Particles in POE Korea LG Chem LC670US$ 1.02 - 1.08MOQ: 5000 Kilograms
-
Toughened Pe High Transparent Tear Resistant Impact Resistant Sole Plastic in POE Korea LG Chem LC10US$ 2.70 - 2.82MOQ: 5000 Kilograms
-
High Density Polyethylene (HDPE) in HTA-016 Excellent Performance Supply of High Performance MaterialUS$ 1.2 - 1.5MOQ: 1 Kilogram
-
Supply Polyethylene High Density Exxonmobil Virgin Film Injection Grade HDPE HMA-016 Granules for PackingUS$ 1 - 1.5MOQ: 1 Kilogram
-
Kunlun Natural HDPE 6095 FPC and HDPE 8040C High-Density Polyethylene Products in Hdpe Mb7581US$ 0.98 - 1.23MOQ: 25 Kilograms
-
Hdpe Natural Kunlun in Hdpe 6095 Fpc Hdpe 8040cUS$ 0.98 - 1.23MOQ: 25 Kilograms
-
Cheap and Fine Hdpe Kt10000 Bm1052j Hd5502s 2200j F00952 7260 Polyethylene Hdpe Grains in Hdpe Pe100US$ 0.98 - 1.23MOQ: 25 Kilograms
-
LDPE Qatar Petrochemical MG70 Is Used for High Flow Low Density Polyethylene Particles of Plastic Flower Wire MasterbatchUS$ 1.75 - 1.80MOQ: 1000 Kilograms
