Polymer Tape
The T-300 series is cold applied tape coating systems for anticorrosion of field joints, fittings, and specifically piping. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.
Product Advantages:
Heavy duty adhesive.
Conformable to irregular shapes.
No release liner / release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.
T-300 Joint Tape (Polymer Tape, Polymer Tapes, Tape Polymer Group) Series Coating Systems with AWWA C-214 Standard:
|
Type of the tape |
T-365 |
T-380 |
T-3100 |
T-3130 |
||||
|
Thickness (ASTM D 1000) |
mm |
mil |
mm |
mil |
mm |
mil |
mm |
mil |
|
0.64 |
25 |
0.76 |
30 |
1.02 |
40 |
1.27 |
50 |
|
|
Tensile: |
31 lbs/in |
31 lbs/in |
41 lbs/in |
52 lbs/in |
||||
|
Length: |
40 Meter |
30 Meter |
25 Meter |
20 Meter |
||||
|
Width: |
2, 3, 4, 6, 9,12 |
|||||||
|
Colour: |
Black, White, Red, Blue, Purple, etc. |
|||||||
|
Elongation: |
300% |
|||||||
|
Peel Adhesion to Prime Pipe: (ASTM D 1000) |
230 oz/in, 25N/10mm |
|||||||
|
Cathodic Disbandment: (ASTM G8) |
0.25 in radius 6.4 mm |
|||||||
|
Water Vapor Transmission Rate: (ASTM F1249) |
0.2g/100in2 /24h, 0.3mg/cm2/24h |
|||||||
|
Water Absorption: (ASTM D570) |
≤ 0.1 |
|||||||
|
Volume Resistively: (ASTM E257) |
2.5 X 1012 ohm·cm |
|||||||
|
Dielectric Strength: (ASTM D 149) |
40 KV |
|||||||
|
Temperature Range: (Normal in Ground Service) |
-30 to 160 oF, -34 to 71oC |
|||||||
Send Inquiry to This Supplier
You May Also Like
-
ABS Granules TH-550 Thermoforming Grade for Automotive Interior PartsNegotiableMOQ: 1 Kilogram
-
Kolon POM KOCETAL K100 K300 K500 K700 K900 Polyformaldehyde POM Resin Raw Material Made in KoreaUS$ 1.88 - 2.05MOQ: 25 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons