Contact Platform Support
Help CenterAC220 / 50Hz Automatic Wire Crimping Machine With 3T Punching Force
Related Products
-
Automatic Wire Crimping Machine Plug Making Machine With Single EndNegotiableMOQ: 1 Set -
2 Core Flat Cable Terminal Automatic Wire Crimping Machine Cut Strip Crimp WiresNegotiableMOQ: 1 Piece
-
BS 1363 Automatic Wire Crimping Machine , Auto Plug Inserts Machinery 80N - 250NNegotiableMOQ: 1 Set
-
Automatic Wire Cable Crimping Machine Cable Cutting Stripping Crimping MachineNegotiableMOQ: 1 Set
-
Flat Type Plug Terminal Automatic Crimping Machine for Cable Wire 1800~2000pcs/hourNegotiableMOQ: 1 Set
Certification:CE
AC220 / 50Hz Automatic Wire Crimping Machine With 3T Punching Force
Description:
Wire stripping and pressure connection are completed once for all.
Equipped with automatic air blowing and oil feed unit, blockage by scrapped materials can be reduced and service life of blade can be prolonged.
Saved 3-5 labor which including wire stripping twice, insert in wires to terminal ends, punching & cutting the connecting part.
Applicable cable:
SPT-1, SPT-2, NISPT-1, NISPT-2, VFF, HVFF, VCTFK, H03VVH2-F, H05VVH2-F, RVV (It can\'t be commonly used for single and double insulation cables).
Quick Detail:
Place of Original |
Dongguan Guangdong China(Mainland) |
Brand name |
Senjia |
Usage |
Crimping |
Color |
White |
Certificate |
CE |
Feature |
Full-automated |
Specification & Parameter:
Model of machine |
SD-3000B |
Pressure connection speed |
2,300~2,400pcs / hour |
Punching Force |
3T |
Holding force on plug range |
80-250N |
Stripping length of outer jacket |
As per customer’s requirements can be adjusted |
Stripping length of conductor jacket |
As per customer’s requirements can be adjusted |
Voltage |
AC220V / 50Hz |
Pressure of air source |
0.5~0.8Mpa |
Weight |
275kg |
Dimension |
830mm*490mm*1,470mm |
Features:
1, Integrating function of wire cutting, striping, splitting and crimping into one machine；
2, If no wire on the crimping position of machine, the feed of terminals will automatically stop to avoid the waste of materials；
3, Saving manpower and energy,effectively improve production capacity to 2000-2300 piece/hour by one operator with one machine；
4, Lower work related injury rate compared with previous operation mode；
Preparation before operation:
1, Properly lubricate all lubrication points of machine;
2, Check if the screw of the upper and lower riveting blades at the crimping position is fully fastened;
3, Check if the air pressure reaches over 4.5KG/cm²;
4, Check if the position of feeding terminals is correct;
5, Check if material scraps have been cleared away;
6, Check if any abnormal sound heard from machine motor or other mechanical parts when stepping down the pedal switch after start-up of machine.
Products showing:
Applicable Terminal :
Send Inquiry to This Supplier
You May Also Like
-
Scrap Car Tire Shredder Machine Truck Tire ShredderUS$ 65000 - 88000MOQ: 1 Set
-
Scrap Drum Metal Can Metal Steel Shredder Machine for Recycling WasteUS$ 55000 - 98000MOQ: 1 Set
-
New Technology Pyrolysis Plant With Short Heating TimeUS$ 30,000 - 50,000MOQ: 1 Set
-
Factory Price Rubber Tire Recycling Machine Rubber Powder Grinding MachineUS$ 1,800 - 5,500MOQ: 1 Set
-
Forklift Solid Tire Press Machine 80T 100T 120 TUS$ 16 - 200MOQ: 1 Piece
-
High Output Bead Wire SeparatorUS$ 1,000 - 5,000MOQ: 1 Set
-
High Output Rubber Crumb Production LineUS$ 34,000 - 114,000MOQ: 1 Set
-
Amazing Equipment Waste Tire Pyrolysis Plant for OilUS$ 35,000 - 50,000MOQ: 1 Set
-
Mini Waste Paper Compress Baling Machine Rubbish Press MachineUS$ 3,420 - 4,470MOQ: 1 Set
-
Salable PS Foamed Sheet ManufacturerUS$ 1,000 - 50,000MOQ: 1 Set
