50Hz 3Ph Stainless Steel Slitting Line / Cr Slitting Line For CR / HRC

50Hz 3Ph Stainless Steel Slitting Line / Cr Slitting Line For CR / HRC

 Specifications: 

1. Hydraulic entry coil car 

  ◆The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.

  ◆It is driven vertically by hydraulic cylinder with four guide pillars.   

  ◆The level movement is driven by cycloid motor .

2. Hydraulic cantilever un-coiler

  ◆Supporting steel rolls and uncoiling.

  ◆It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.

  ◆7.5kw motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.

3. Slitting machine

  ◆Power part: This is composed of power-stand, decelerator, 15KW direct current motor, gear distributing case, coupler, spindle, connecting-cover, side guide device, etc.

  ◆Host machine: This is composed of bottom-stand, fixed bracket, big slide, knife pivot (φ180mm, 2pcs), movable bracket, slide, the front and back adjustable device of bracket, knife pivot lifting and pressing down adjustment device.

  ◆It change the blades through moving out the bracket manually or hydraulically .

4. Scrap winder         

  ◆It consists of base, the shaft and plate of scrap material, friction wheel, supporting wheel chain, chain, decelerator and moment motor.

  ◆It is used to pack and wind the slitting scrap strips.

5. Tension device

  ◆It consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and hydraulic shaft lifting the press down device.

6. Hydraulic recoiler       

  ◆It consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator, 30KW frequency conversion control motor.

  ◆It uses the hydraulic movable arm with the supporting spacers to ensure the even recoiling quality.

7. Hydraulic exit coil car  

  ◆The car can carry the dividing coils and lift up and down and is movable.

8. Electric control system: electric cabinet and operate table.

9. Hydraulic system: the hydraulic stand, pipes and the connect part.

 Delivery 

 Applications: 

ZJX-0.5-3X1250mm simple hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.

Competitive Advantage: