Contact Platform Support
Help Center
Related Products
-
GRP / FRP Cartridge Filter HousingNegotiableMOQ: 1 Piece -
Stainless Steel Cartridge Filter HousingNegotiableMOQ: 1 Piece
-
40\" Big FRP Cartridge Filter Housings For Reverse Osmosis Pre-FiltrationNegotiableMOQ: 1 Piece
-
40\" Dust Collector Cartridge Filter Housing For Utility Water , Self CleaningNegotiableMOQ: 1 Piece
-
Stainless Steel Cartridge Filters For Swimming Pools , High PressureNegotiableMOQ: 1 Piece
Certification:ISO 9000
High Pressure Plastic Cartridge Filter Housing
Quick Detail:
Plastic cartridge filter housings are corrosion resistant, can be used in SS-none-replace field.
Description:
- All the parts of this series filters are made of UPVC material for best chemical compatibility and corrosion resistance.
- All filter housings hydrostatically tested
- The inlet and outlet are in the same line, which connected with the pipe is adopt a 1.5” or a 2” union.
- The water is distributed from bottom to top.Water is well-proportioned with small
strike to cartridges and air is easy to be discharged.
- The bottom system is designed together as a whole with the top localizer & closure system.
Cartridges are easy to be installed, push down and closed, preventing leaking inside.
- A series: The lid and the body are connected by a nut. Ensure a good seal performance.
- B series: The lid and the body are connected using eyebolts flange method, ensure the filter can stand higher pressure.
- UPVC cartridge filter housing is corrosion resistant, It can be used in SS-none-replace field.
- It is achieved 0-0.6Mpa 100,000 times recycle fatigue test successfully.
Applications:
Commercial/Residential Drinking Water Cooling Tower Filtration Process Water Reverse Osmosis Pre-Filtration Ground Water Remediation Utility Water Industrial Waste Water Treatment Ground Water Under Direct Influence (GUDI)Specifications:
A & B SERIES
Note:
It can install all material; all precision’s cartridge 5 PCS or 3 PCS, which I.D. is 28-30mm, O.D. is 65-70mm.
The highest working temperature is 45℃, The size of the two holes in the lid of the filter is G1/4″. If the thread of the pressure gauge is metric standard, should add an adaptor.
C SERIES
Note:
It can install all material; all precision’s cartridge 9 PCS or 8 PCS, which I.D. is 28-30mm, O.D. is 65-70mm.
The highest working temperature is 45 ℃, The size of the two holes in the lid of the filter is G1/4″. If the thread of the pressure gauge is metric standard, should add an adaptor.
Competitive Advantage:
JCD WATER is professional manufacturer of water treatment equipments. We provide high quality products with advanced technologies, fast delivery and reasonable cost to meet customers’requirements. Meanwhile we distribute a lot of accessories for convenience of our customers.
JCD WATER covers water treatment equipment manufacturing, system assembling, accessory distributing and supply economic and efficient solutions for water treatment projects.
Within our professional services, we provide you best solutions to assist you win the market, including design, production, maintenance, delivery. Our principle is to make you win, then we win.
Send Inquiry to This Supplier
You May Also Like
-
6，8" and 12"wafer FramesNegotiableMOQ: 500 Pieces
-
Turing C256 Uncooled Infrared ModuleNegotiableMOQ: 50 Pieces
-
CH85 Microwave Oven 0.76ufNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
3SE6020,100% New and Original,Hot Sales!!!NegotiableMOQ: 100 Pieces
-
Resonant Capacitors 1UF 3000VDC 2000VAC 70A 80AUS$ 18.6 - 27.8MOQ: 1 Piece
-
2.7v3000f the Capacitor Charge Circuit is Simple 2.7v3000f CapacitorUS$ 1 - 999,999MOQ: 6 Pieces
-
50V 220UF 50V220UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
-
Bimetal Thermal Switch 250V 5A-25ANegotiableMOQ: 1000 Pieces
