Yellow PVA Filament For 3D Printer Cubify , Leapfrog , FDM , Ultimaker 0.5kg / Spool

Our Advantages:
1.  High quality: absolutely round shape, accurate diameter, no bubble, high tenacity and stable melting point.
2.  Fast delivery: 50tons/month capacity makes sure the storage for normal items.
3.  Order flexibility: Sample or trial orders are warm welcomed.
4.  Wholesaler price: competitive price with qualified quality.

Usage:

Can be used as support or filler material. With ABS filament to achieve good effect, dissolved in water. Extract from the natural orange flavor - limonene, safe and nontoxic.

Soaking time: 6 - 24 hours (depending on the model size).

3D Printing Tips

8 effective ways to avoid warping and curling

A heated build platform helps keep the lowest levels of a print warm as the higher layers are printed. 

This allows the overall print to cool more evenly.

Rafts are a printing option in ReplicatorG and Skeinforge.

A good first layer makes all the difference.  If your starting Z axis height is too high, the extruded filament

 won’t be able to make a good bond with the platform.  If you think your Z axis starting height is too high,

 try lowering it by 0.05mm increments until you find a good first layer.

Printing slower allows finer detail, better adhesion to the build surface and lower layers, and gives the

 printed part more time to cool evenly.

Printing at a lower temperature isn’t always an option.  Ideally, you should be printing at the lowest temperature required for extrusion and

 that allows good interlayer adhesion. 

When printing a model you can chose to print it hollow, completely solid, or some percentage between

 zero and 100. By reducing infill there will a reduced amount of internal tension as the object cools,

which can help reduce curling and warping as well.