Contact Platform Support
Help CenterHot-rolled and Corrosion-resistant, Anti-oxidation and Easily Painted Aluminum Round Bar 6061-T651
Related Products
-
Can be Hot-rolled, Tempered and Good Weldability Flat Aluminum Bar 6082-T651US$ 3 - 6$/MOQ: 1 Piece -
Aluminum Round Bar 6061-T651 Obtained ISO9001: 2008, SGS Test GB / T3880-2006 Certification, CompetiUS$ 3 - 6$/MOQ: 1 Piece
-
Hot-rolled, Antioxidant and Good Weldability Flat Aluminum Bar 6082-T651US$ 3 - 6$/MOQ: 1 Piece
-
Corrosion Resistance Aluminum Round Bar / Rod 6061 T6US$ 3 - 6/MOQ: 1 Set
-
Hot Rolled Harden Aluminum Round Bar 6061 - T651 With Good Oxidation ResistanceNegotiableMOQ: 1 Metric Ton
Certification:ISO9001:2008;SGS TEST;GB/T 3880-2006, EN, ASTM
Hot-rolled and Corrosion-resistant, Anti-oxidation and Easily Painted Aluminum Round Bar 6061-T651
Description:
1. Aluminum , Grade: 6061, T6 or T651
2. Hot rolled, Temper & Pre-stretching ,,T651
3.Production leadtime: 25~45days
4. Chemical composition:
Si |
Mn |
Cr |
Zn |
Mg |
Ti |
Fe |
Cu |
0.40~0.8 |
0.15max |
0.04~0.35 |
0.25 |
0.8~1.2 |
0.15 |
0.7 |
0.15~0.4 |
5. Tensile strength: σb (MPa):≥180
Yield strength :σ0.2 (MPa):≥110
Elongation rate: δ5 (%):≥14
Machinability
Machinability in the harder T 4 and T6 tempers is good. It is notably less easy to machine in the annealed temper.
Forming
Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods.
Welding
The alloy has very good welding characteristics and may be welded by all of the common welding techniques. Gas tungsten arc welding is generally used for thin sections (less than 0.032\") and gas metal arc welding is used for heavier sections. Use alloy 4043 filler wire for best results, although a decrease in T 6 properties will result.
Heat Treatment
Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.
Forging
The alloy is capable of being hot forged at temperatures in the range of 900 F to 750 F.
Applications: Used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, aircraft gun carriage ,railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, and in pipelines.
Specifications:
Hot rolled condition |
aluminum bar (mm) |
Brand |
Dia |
Length |
|
20~200 |
2500~4500 |
RuiYuan |
Competitive Advantage:
Send Inquiry to This Supplier
You May Also Like
-
ABS Plastic Fan Blade 3 Blade 5blade for Electronic Floor Fan Orange Colour 16inch 390mm 18inch 450mm Good PriceNegotiableMOQ: 1
-
Hot Sale CE Approved Air-conditioning Fan Filter ManufacturerUS$ 6.29 - 26.8MOQ: 50 Pieces
-
AFB0948HH DELTA FANNegotiableMOQ: 1 Piece
-
8'' Non-insulated Flexible Aluminum Duct for Inline FanNegotiableMOQ: 1000 Pieces
-
Electric Fan TimerUS$ 0.5 - 2MOQ: 1000 Pieces
-
Circulation Air Fans for Greenhouse Cooling SystemUS$ 50 - 300MOQ: 20 Units
-
OEM Air Blower ,plastic Blower ShellUS$ 1,000 - 5,000MOQ: 1 Set
-
Portable Oxygen Generator for Home UseUS$ 2,000 - 5,000MOQ: 1 Set
-
CDF Circular Axial Ventilating FanNegotiableMOQ: 1 Piece
-
STAINIESS FANNegotiableMOQ: 1 Unit
