4 Color Flexographic Printing Press Machine for Plastic Film , Multifunction
Certification:CE
4 Color Flexographic printing press machine for Plastic Film , multifunction
Specifications
4 Colour Flexographic Printing Machine
1) Print:BOPP,PE,PP,OPP,PAPER..
2) Speed: 150/min
3) Ceramic roller, chamber dr.blade
1. The main features:
1. Take it easy, accurate color, long life.
2. Use motors, variable frequency speed control, saving electricity, small running fluctuations.
3. Off printing roll automatic stop the ink-running motor, and up-printing roll automatic start running the ink.
4. Use special synchronous belt drive, accurate printing size.
5. Two sets of heating devices, including central heating and constant temperature control system for
group control.
6. Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective
layer of hard chromium.
7 Alloy roll with hard oxidation, treating by dynamic balance, static balanced.
8 With cold wind bellows, and can effectively prevent produce with ink adhesion after printing
9. Print produce are clear and good arrangement quality.
10. Bearing: NSK, Japan Brand, Germany ASNU aluminum alloy roll
2. Main parameter:
|
Model |
YTB-4800 |
|
Machine Colors |
4 Colors |
|
Max. printing material width |
810mm |
|
Max. printing width |
760mm |
|
Printing material |
OPP:20~70μm,BOPP:18~60μm,PE:35~100μm, |
|
Printing length(repeat) |
7.5\"~40\"(190mm~1000mm)/7.5\"~50\"(190mm~1270mm) |
|
Max. Mechanical speed |
90m/min |
|
Max. Printing speed |
30-70m/min |
|
Register precision |
Longitude:±0.25mm; Transverse:±0.25mm |
|
Press power |
Mechanic control |
|
Master motor power |
3.7kw,Taiwan |
|
Machine power |
24kw |
|
Outline size |
5.0m×2.2m×2.6m |
|
Power: |
440V/380V/220V,50/60Hz |
|
Rewind/Unwind DIA |
Φ800mm-1000mm |
|
Unwind way |
Center unwind, By air shaft , with 5kg magnetic 1 pcs |
|
EPC system: |
Edge Position Controller for unwind 1 Pcs |
|
Tension system |
Automatic tension control 2PCS |
|
Unwinding loading way |
By air shaft , 1 pcs |
|
Unwind web cylinder |
Φ76mm (inner diameter) |
|
Printing plate lifting system |
Automatic Hydraulic cylinder control printing roll up and down |
|
Anilox roll amd Inking way |
Ceramic anilox roller (100-1000lpi), single doctor blade, one diaphragm pump |
|
Inking motor |
deceleration motor,60w |
|
Drying model |
Electric heating |
|
Drying power |
14 kw |
|
Air blower (large) |
0.95kw / 4 pcs |
|
Air blower (small) |
75w / 8 pcs |
|
Rewind way |
Center rewind, By air shaft , with 5kg magnetic 1 pcs |
|
Tension system |
Full automatic tension control for rewind 1PCS |
|
Rewinding unloading way |
By air shaft , 1 pcs |
|
Rewind web cylinder |
Φ76mm (inner diameter) |
|
Rewind material unload way |
By Manual |
machine printing effect :
Send Inquiry to This Supplier
You May Also Like
-
Crystal Oscillator ModuleNegotiableMOQ: 2400 Pieces
-
Hot Sales !! HS-49S Resonator 8MHZ CrystalNegotiableMOQ: 1 Bag
-
Oscillator for Sale 7050(7.0*5.0mm)48 Mhz 5v Crystal Oscillator Ultrasonic ResonatorUS$ 0.25 - 0.25MOQ: 1000 Pieces
-
OCXOUS$ 130 - 250MOQ: 1 Piece
-
SMD Crystal Oscillator NX5032GA-8.0000MHZUS$ 0.01 - 0.99MOQ: 10 Pieces
-
Crystals and Oscillators 8MH 49S SMDUS$ 0.01 - 1MOQ: 1 Piece
-
3225 SMD Crystal Oscillator 24.000MHz 12pF 10ppm Matched for JieLi Bluetooth Chip IC JL Bluetooth Audio Module Wireless Device DIY Electronic SMT 4PINUS$ 1MOQ: 1 Piece
-
JAUCH CRYSTAL,JTX310 Quartzcrystal,Jauch Quarrtz GmbH tz GmbHUS$ 1MOQ: 1000 Blades
-
7W-49.152mba-T Txc in StockUS$ 1.26MOQ: 1000 Pieces
-
TCXO TYKTCLSANF-26.000000 Temperature Compensated Crystal Oscillator 26MHz ±2ppm 1.8VNegotiableMOQ: 1000 Pieces