Contact Platform Support
Help CenterAnnealed Stainless Steel Seamless Pipe JIS G3459 JIS G3461 SUS304 OD 6 - 830mm
Related Products
-
ASTM A213 TP316Ti Stainless Steel Seamless Pipe , UNSS31635 1.4571 Seamless TubeNegotiableMOQ: 1 Roll -
Large Diameter Seamless Pipe , Cold Drawn Stainless Steel Tube 28\" 710mm ODNegotiableMOQ: 1 Piece
-
TP347H Austenitic Stainless Steel Seamless Pipe For Heat Exchanger Tube UNS S34709NegotiableMOQ: 1 Piece
-
Cold Rolled SS Round Tube, ASTM A312 / DIN17456 Stainless Steel Seamless PipeNegotiableMOQ: 1
-
A312 SS Seamless Tube TP310S Stainless Steel Seamless Pipe With Butt Weld EndNegotiableMOQ: 1 Set
Certification:ISO, GOS, PED
Annealed Stainless Steel Seamless Pipe JIS G3459 JIS G3461 SUS304 , OD 6mm - 830mm
Quick Detail:
Stainless Steel Seamless Pipe JIS G3459, JIS G3461, JIS G3463 SUS304 SUS316L SUS321 Pickled and Annealed
Annealed Stainless Steel Seamless Pipe JIS G3459 JIS G3461 SUS304 , OD 6mm - 830mm
Size Range:
|
Production |
Outside Diameter |
Wall Thickness |
|
Seamless Pipe |
6.00mm to 830mm |
0.5mm to 60mm |
Stainless Steel Seamless Pipe:
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 8 are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: BWSS Official Original MTC paper will be supplied for each order.
Standard Specification:
ASTM A213 / A213M - 11a:Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
ASTM A269 - 10:Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
ASTM A312 / A312M - 12:Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A511 / A511M - 12:Standard Specification for Seamless Stainless Steel Mechanical Tubing
ASTM A789 / A789M - 10a:Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A790 / A790M - 11:Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
DIN 17456-2010:GENERAL PUROSE SEAMLESS CIRCULAR STAINLESS STEEL TUBES.
DIN 17458-2010:Seamless Circular of Austenitic Stainless Steel Tube
EN10216-5 CT 1/2 : Stainless Steel Seamless Pipe & Tube
GOST 9941-81:SEAMLESS COLD- AND WARM-WORKED TUBES MADE OF CORROSION RESISTANT STEEL.
Others like BS, JIS standard or can supply
Material Grade:
|
American Standard |
Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Others:TP405,TP409, TP410, TP430, TP439,... |
|
Europen Standard |
1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438, 1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
|
Russia Standard |
08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ |
PRODUCTION PROCESS:
PACKING:
|
By Bundle |
By Wooden Yoke |
By Wooden Case |
OUR BWSS PRODUCTION WORKSHOP
The safety in production, quality first.
Specialized production workshop, professional production staff.
Shop the \'7 s\' principle
The standardized production, the comprehensive treatment
BWSS CHARISMA :
Make development by enlarging scale brand building and internationalization.
Keep Challenging and Innovation.
Advance manufacturing instruments.
Create perfect quality.
Take st
Send Inquiry to This Supplier
You May Also Like
-
250-275 TPH Steel Structure Crusher Plant With HST315 Cone Crusher and 2760 Vibrating Screen for Final Material 0-15mmNegotiableMOQ: 1 Set
-
Multifunctional Scrap Steel Baling Presses & Metal Baling EquipmentUS$ 8999 - 15000MOQ: 1 Set
-
Aluminium Dross Breaker Aluminum Oxide CrusherNegotiableMOQ: 1 Set
-
Bimetal Overlay Wear Plate for Crusher Main Frame LinersUS$ 100 - 100MOQ: 1 Piece
-
SAIMO Automatic Train Sampler Auger Sampling Systems Coal SamplesNegotiableMOQ: 1 Combo
-
Electric Start Mobile Crusher Factory Outlet 18KW 1003086 for Sale Max.20t/h 10 Woking Days After Received The DepositNegotiableMOQ: 1
-
Roll Crusher Used in Mining, Smelting, Building Material, Highway, RailwayUS$ 3,000 - 10,000MOQ: 1 Set
-
Primary Jaw Crushing PE-400X600US$ 1,000 - 100,000MOQ: 1 Set
-
Can Be Designed Carbon Steel Concrete Vibration TableUS$ 1,999 - 19,999MOQ: 1 Set
-
ISO Electric Motor Rock Breakers for SaleUS$ 500 - 80,000MOQ: 1 Set
