Contact Platform Support
Help Center
Related Products
-
Full Automatic CZ Purlin Roll Forming Machine With 30KW Gearbox DrivenUS$ 60000$ - 150000$MOQ: 1 Set -
Carbon Steel Sigma Purlin Roll Forming Machine 15KW Hydraulic StationUS$ 45000$ - 100000$MOQ: 1 Set
-
Hydraulic PLC Control Purlin Roll Forming Equipment , Z Purlin Making MachineUS$ 35000$ - 60000$MOQ: 1 Set
-
Customized Carbon Steel Purlin Roll Forming Machine , 18.5KW Cold Roll FormerUS$ 35000$ - 60000$MOQ: 1 Set
-
Hydraulic Cutting Carbon Steel C Purlin Roll Forming Machine With 13 StationsUS$ 35000$ - 60000$MOQ: 1 Piece
Certification:CE
Quickly Exchange CZ Purlin Roll Forming Machine For Web From 80mm To 350mm
Description
1. One machine can produce different C and Z Purlins through simple manual step-less adjustment, when to produce different profiles, no need to change the forming rollers. In the process, machine adopt automatic control model, it can auto punch, cut, forming based on inputting length of purlin, portrait hole distance, quantity, etc dates.
2. C and Z purlin roll former make up of de-coiler, feeding, leveling, 2 sets hydraulic punching device, hydraulic cutting, speediness interchangeable forming machine, PLC control system, hydraulic stations, run-out tables.
3. This line main forming drive adopt reducer motor and frequency conversion control, speed control…
4.It is quick and easy to operate the machine, and beautiful appearance, high production efficiency, forming speed up to 20m/min.
Composition of machine
|
Roll forming main machine |
1 unit |
|
Un-coiler |
1 unit |
|
PLC Control panel |
1 unit |
|
Hydraulic station |
1 unit |
|
Pre-cutting device |
1 unit |
|
Pre-punching device |
1 unit |
|
Safety cover device |
1 unit |
|
Manual out table |
2 unit |
Specifications
|
Coil Material |
Thickness |
1.5-3.5mm |
|
Coil width |
Depend on customer’s requires |
|
|
Yield Strength |
250-350Mpa |
|
|
Material |
GI. Carbon Steel |
|
|
Purlin Sizes |
Web width |
80-350mm |
|
Height |
40-80mm |
|
|
Lip |
12-25mm |
|
|
Conversion process |
C-C different sizes |
Approx. 2-3 minutes |
|
Z-Z different sizes |
Approx. 2-3 minutes |
|
|
C-Z or Z-C |
Approx. 5-15 minutes |
|
|
Decoiler / Uncoiler |
Coil Width |
Max. 600mm |
|
I.D |
510-610mm |
|
|
O.D |
Max. 1300mm |
|
|
Capability |
Max. 5 Tons |
|
|
Decoiler type |
Manual / Hydraulic/Automatic |
|
|
Feeding & Leveling |
Pinch feeding |
3 Units ( 6 Rollers ) |
|
Leveling |
7 Rollers ( Upper 3 Rollers, Bottom 4 Rollers ) |
|
|
Punching device |
Punching motion |
Hydraulic Punching, Pre-punching |
|
Punching dies |
Cr12 Mov Steel, HRC58-62 |
|
|
Punching station |
1-6 Unites ( depend on hole patterns ) |
|
|
Punching in longitude controlled by PLC, punching at horizontal adjusted by manual hand wheel. |
||
|
Cutting device |
Cutting motion |
Hydraulic Cutting, Pre-Cutting ( cutting sheet before forming ) |
|
Cutting blades |
Cr12Mov with heat treatment HRC58-62 |
|
|
Length Measuring |
Automatic length measuring by encoder & PLC. |
|
|
Cutting Tolerance |
1.5mm(per 3m) |
|
|
Roll Forming Machine |
Forming Stations |
17 Stations |
Send Inquiry to This Supplier
You May Also Like
-
Meltblown PP Non-Woven Fabric Making Machine for Face Mask N95 Medical MaskNegotiableMOQ: 1
-
PVC Monofilament Extruding Line(Used), Monofilament Machine, Monofilament EquipmentUS$ 8 - 10MOQ: 1 Piece
-
PVC Laminated Gypsum Board Production LineUS$ 100,000 - 200,000MOQ: 1 Set
-
With Iron Full Plastic Mask Nose Wire Making Machine for Face MaskUS$ 15,000 - 15,000MOQ: 1 Set
-
Factory Price Melt Blown Fabric Production Equipment and Extruder LineUS$ 120,000 - 130,000MOQ: 1 Set
-
Production Line Used for Granules Powder Material FeederUS$ 650 - 800MOQ: 1 Set
-
TZ Brand Plastic Filament Extruding MachineNegotiableMOQ: 1 Set
-
Air Bubble Roll Line Stage LightingUS$ 20,000 - 60,000MOQ: 1 Set
-
Food Grade Silicone ProductsNegotiableMOQ: 1 Piece
-
Semi-auto Finger Joint Shaper(hydraulic)NegotiableMOQ: 1 Piece
