Contact Platform Support
Help CenterPrecision Tapered Roller Bearings: Precision Tapered Roller Bearings 33024
Related Products
-
Precision Tapered Roller Bearings: Precision Tapered Roller Bearings 30224NegotiableMOQ: 1 Set -
Precision Tapered Roller Bearings: Precision Tapered Roller Bearings 30324NegotiableMOQ: 1 Meter
-
Precision Tapered Roller Bearings: Precision Tapered Roller Bearings 31324NegotiableMOQ: 1 Set
-
Metric Precision Tapered Roller Bearings Design 33022NegotiableMOQ: 1 Metric Ton
-
Metric Single Row Precision Tapered Roller Ball Bearings for 30322NegotiableMOQ: 1 Set
Certification:ISO9001, ISO14001
Precision Tapered Roller Bearings
WD tapered roller bearings are produced by WD in many designs and sizes to match their many uses.These can be grouped as follows
- single row tapered roller bearings
- paired single row tapered roller bearings
- double row tapered roller bearings
- four-row tapered roller bearings
Design Features
Designed to take the combination of radial and axial load. Available in both inch size and metric size. Separable outer ring and inner ring assembly, interchangeable, easy to fit and maintenance. Low noise design, reaches to V1 grade noise level, contributes to the quieter running of automobile engine and gearbox.WD tapered roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged. The projection lines of all the tapered surfaces meet at a common point on the bearing axis. Their design makes tapered roller bearings particularly suitable for the accommodation of combined (radial and axial) loads. The axial load carrying capacity of the bearings is largely determined by the contact angle ; the larger contact angle the greater axial load carrying capacity .
Tapered roller bearings are generally separable, i.e. the cone, consisting of the inner ring with roller and cage assembly, can be mounted separately from the cup (outer ring).
WD tapered roller bearings have the logarithmic contact profile that provides optimum stress distribution over the roller/raceway contacts. The special design of the sliding surfaces of the guide flange and large roller ends considerably promote lubricant film formation in the roller end/flange contacts. The resulting benefits include increased operational reliability and reduced sensitivity to misalignment.
WD Tapered Roller Bearings have tapered inner and outer ring racesways between which tapered rollers are arranged.Both of which have single and double row structures.With the higher precision than P5 standard, they have high dimension and running accurancy accordingly. Tapered roller bearings with high speed and long lifespan are always used in Automobile, Gearbox, Main shaft of machine tool, Construction machineries, Rolling mill equipment.
Cages
WD tapered roller bearings are fitted with one of the following cages.
- A pressed window-type steel cage, roller centred.
- An injection moulded window-type cage of glass fibre reinforced polyamide 6, 6, roler centred.
- A steel pin-type cage
Precision Tapered Roller Bearings 33024
| Bearing Code | 33024 |
| d | 120 |
| D | 180 |
| B | 48 |
| C | 38 |
| T | 48 |
| R2smin | 2.5 |
| R4smin | 2 |
| Mkg | 4.22 |
| CrkN | 310 |
| CorkN | 560 |
| E | 0.31 |
| Y | 2 |
| YO | 1.1 |
| n1/min | 1800 |
| D1max | 132 |
| D2max | 130 |
| D3min | 160 |
| D4min | 171 |
Send Inquiry to This Supplier
You May Also Like
-
Pressure VesselNegotiableMOQ: 2700 Sets
-
Customized Factory Direct Water Weed Cutting Boat In The RiverUS$ 30,000 - 100,000MOQ: 1 Set
-
YDS Cryogenic Container/tank/dewar for Liquid NitrogenUS$ 168 - 678MOQ: 1 Piece
-
SS304 Two Motions Reactor Vessels With PlatformUS$ 1,000 - 10,000MOQ: 1 Set
-
Plastic Diesel Oil Tanks , Fuel TanksUS$ 25 - 85MOQ: 1
-
Pressed Carbon Steel Shell Segment for Pressure VesselUS$ 500 - 10,000MOQ: 1 Set
-
Stainless Steel SS304 316L ReactorUS$ 2,000 - 50,000MOQ: 1 Set
-
Safe SF6 Gas Cylinder With Different Voloume Liter and kgUS$ 350 - 520MOQ: 1 Piece
-
Alloy 400 1800 Psi Single Ended 1/8 1/8" Female NPT Gas Sample CylindersUS$ 150 - 300MOQ: 1 Piece
-
Tin-plated and Aluminum CansUS$ 0.1 - 0.2MOQ: 30000 Pieces
