EN60950 , GB4943 DC-DC Converters 13W Output 12 Volt MT13-12S12-PECW
DC-DC Converters 13W Output 12V MT13-12S12-PECW
Key Features
Output power: 13W
Wide input range:9-36Vdc
High conversion efficiency: Up to 87%
Line regulation to ±0.5%
Load regulation to ±1.0%
Fixed operating frequency
Isolation voltage :1500V
Enable (ON/OFF) control
Output over-voltage protection
Output over-load protection
Hiccup mode short circuit protection
Over-temperature protection
Input under-voltage lock-out
Output voltage trim -5~+10 % Vout
Product Overview
These DC-DC converter modules use advanced powerprocessing, control and packaging technologies to providethe performance, flexibility, reliability and cost effectivenessof a mature power component. High frequency Active Clampswitching provides high power density with low noise andhigh efficiency.
Product’s Introduction
The MT series is an independently regulated single output converter that uses the industry nonstandard brick package size. Integral PCB transformer/inductor is used for all models in this series. This new design technique has greatly improved the magnetic coupling, reduced switching spike and provided performance consistency. It also streamlines the production process by completely eliminating the hand-wind magnetic assembly process from production lines.
Part Numbering — MT13-12S12-PECW
1. Electric Characteristics
Electrical characteristics apply over the full operating range of input voltage, output load and base plate temperature, unless otherwise specified. All temperatures refer to the operating temperature at the center of the base plate. All data testing at Ta=25oC except especial definition.
1.1 Absolute Maximum Ratings
| Parameter | Min | Typ | Max | Units | Notes |
| Input Voltage | 45 | Vdc | Continuous, non-operating | ||
| 36 | Vdc | Continuous, operating | |||
| 45 | Vdc | Operating transient protection,<100mS | |||
| Isolation voltage | 2000 | Vdc | Input to output | ||
| Operating Temperature | -55 | 100 | ℃ | ||
| Storage Temperature | -65 | 125 | ℃ | ||
| Enable to Vin- Voltage | -0.5 | 10 | Vdc |
1.2 Input Characteristics
| Parameter | Min | Typ | Max | Units | Notes |
| Input Voltage Range | 9 | 24 | 36 | Vdc | Continuous |
| Under-Voltage Lockout | 8.6 | 8.8 | Vdc | Turn-on Threshold | |
| 8.1 | 8.3 | Vdc | Turn-off Threshold | ||
| Maximum Input Current | 1.8 | A | Full Load;9Vdc Input | ||
| Efficiency | 87 | % | Full load, derating input voltage.Figures 1-4 | ||
| Dissipation | 0.4 | W | No Load | ||
| Disabled Input Current | 5 | mA | Enable pin low | ||
|
Recommend External Input Capacitance |
100 | μF | Typical ESR 0.1-0.2Ω |
1.3 Output Characteristics
| Parameter | Min | Typ | Max | Units | Notes |
| Output Voltage Set Point | 11.85 | 12.00 | 12.15 | Vdc | Nominal input; No load;25℃ |
| Output Voltage Range | 11.75 | 12.00 | 12.25 | Vdc | |
| Output Current Range | 0.01 | 1.1 | A | Subject to thermal derating. Figures 5-7 | |
| Line Regulation | ±0.02 | ±0.50 | % | Low line to high line; full load | |
| Load Regulation | ±0.02 | ±1.00 | % | No load to full load; nominal input | |
| Temperature Regulation | ±0.002 | ±0. |
Send Inquiry to This Supplier
You May Also Like
-
Rectifier DiodeNegotiableMOQ: 2300 Pieces
-
Discrete Traics (Isolated) BTA41-200 BTA41-400 BTA41-600 BTA41-800 BTA41-1000 BTA41-1200US$ 0.1 - 0.2MOQ: 10 Pieces
-
Samsung 55-60lm 0.5W SMD 2835 LED DiodeUS$ 0.03 - 0.08MOQ: 2000 Pieces
-
DIODE TS820600 ST Electronic ComponentsUS$ 100 - 1,000MOQ: 1 Piece
-
Single Direction Diode for Microwave OvenUS$ 0.1 - 0.2MOQ: 1000 Pieces
-
Hot Sale!!! 50W Laser Diode Various Metal Label MarkingUS$ 7,000 - 10,000MOQ: 1 Set
-
445nm 1500mwNegotiableMOQ: 1
-
Semiconductor Controlled Rectifier For WelderUS$ 10 - 120MOQ: 100 Pieces
-
BZX84-C4V7 Active Components (Zener Diodes ) BZX84C4V7US$ 0.1 - 10MOQ: 1 Piece
-
Green Line Laser Diode ModuleUS$ 5 - 20MOQ: 5 Pieces