TRI-BAND Repeater , Mobile Phone Signal Repeater CE & RoHs , 1920-1990MHZ
Certification:CE&ROHS
TRI-BAND Repeater , Mobile Phone Signal Repeater CE & RoHs , 1920-1990MHZ
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
|
Introduction To Mobile Phone Signal Repeater |
|
1. Enhance Mobile Phone |
|
2. Improve |
|
3. Reduce |
|
4. Protract |
|
5. Economic Building Cost |
|
6. Easy Operation |
|
7. Easy Installation |
|
8. Build-in Power Supply |
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
|
2. Features |
|
High gain, easy installation and operation. |
|
Full-duplex, single-port design, build-in power supply. |
|
Use ALC technology, adjust extent automatically |
|
LED Light Working & Signal Condition Indicators |
|
Big linear power, control intermodulation & scatteration stably |
|
Dependability stand by GB6993-86 standard |
|
Compatibility of electromagnetism according with ETS300 609-4 |
|
CE and RoHs Approved |
Technique
|
Frequency range |
Uplink890-915MHz 1710-1785MHz 1920-1990MHZ Downlink935-960MHz 1805-1880MHz 2110-2180MHZ |
|
Gain ( dB) |
Uplink Gp≥55 Downlink Gp≥60 |
|
Export power (Po) |
≥17dBm |
|
Pass band ripple |
≤3dB |
|
I/O impedance |
50Ω/N connector |
|
Noise figure |
≤4dB |
|
Transmission Delay |
≤0.5μs |
|
Ambient temperature |
-10℃~60℃ |
|
Power supply |
AC110~240V 45~55Hz |
|
Size |
220 x180 x 20 mm |
|
Reliability |
To the GB6993-86 standard |
|
Electromagnetic compatibility |
To the ETS300 694-4 standard |
|
Function |
a) Power supply LED denote b) Export power LED denote |
|
coverage area |
200 m2 |
SpecificationsInstallation Sketch Map
Installation Approaches
Fix up outdoor antenna reception on housetop and point to signal tower. Connect outdoor antenna to “outdoor” port in repeater machine through cable. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also. Plug power adaptor into AC power socket and finish installation.Technique Supporting
If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have s
Send Inquiry to This Supplier
You May Also Like
-
10 X 364 Vinnic Watch Batteries L621, AG1 / GI, SR621W10 X 364 Vinnic Watch Batteries L621, AG1 / GI, SR621WNegotiableMOQ: 3000 Pieces
-
ML621S/DN Lithium Rechargeable Coin 5mAH 3V ML621S/DNUS$ 0.01 - 10MOQ: 1 Piece
-
TROILY Brand NiMH Rechargeable Button Cell HB156/060 80mAH 1.2V Secondary BatteryUS$ 0.15 - 0.2MOQ: 100000 Pieces
-
LiFePO4 32700 6000mAh Battery for Electric Tricycle, Bicycle, Bike, Solar Street Light LFP Lithium Battery PackUS$ 1.24 - 1.45MOQ: 1000 Pieces
-
Panasonic Battery Cr2 850mAh 3V Lithium Battery Cr15h270US$ 0.5 - 1.2MOQ: 1000 Pieces
-
CR1220 Panasonic Battery Coin Cell Battery 3V 12 X 2.0 MM 35mAUS$ 0.2 - 1MOQ: 1 Piece
-
CR2032 2025 2016 Button Battery Manual Sealer Hydraulic Coin Cell Crimping MachineNegotiableMOQ: 1 Unit
-
CR2477 Button Battery is Suitable for All Kinds of Electronic ProductsNegotiableMOQ: 500 Bags
-
TWS Earphone Coin CellNegotiableMOQ: 5000 Pieces
-
Button Lithium Battery CR2032,CR2450,CR2016,CR2477US$ 0.1 - 0.6MOQ: 5000 Pieces