Spiral classifier should be noted that three factors

The following is from both internal and external analysis of the factors that affect the efficiency of spiral classifier , in the practical application of the device to be noted that the relevant factors , so that it can carry out its work efficiency and effective regulation .

The first factor is the raw ore , which is a basic factor. The most basic is that its volume size, density and sediment concentration of ore minerals , which have a great impact on the ore processing capacity in terms of equipment. If the volume of ore in the greater density of the harder , the greater the sediment concentration , then equipment for their processing capacity will be less , its production capacity will be greatly reduced. If you want to increase production , then dressing is one of the most basic step , the size of the ore should be moderate , but preferably well in advance of the relevant work off the mud , so that you can increase its production capability.

The second factor is that it 's working conditions. The device has the best general use state . When the device is working , ore concentration is a very important factor that affects the efficiency of the entire device , but it can also affect the size classification of particles volume. As a general practice, it is the ability to work most of the time when it is below the critical concentration . If you want it to reach this state , then put a good control over the density of the ore and its sand content , this is the important part, we need to draw attention .

The third factor is the influence of constituent equipment . This is the most important internal factors. From its own components as well , then , the area of the classification tank is critical factors affecting it . As a general principle , if its area is larger , it will be stronger processing power . But how do we influence the regulation of the factors? This problem can be solved by increasing the diameter of its spiral . But in fact , after the device is made , it will be difficult to change , this would require manufacturers or purchased at a predetermined time to determine the size of a good correlation .

Shanghai PioneerMachinery Manufacturing Co.,Ltd

TEL：0086-21-60273583

FAX：0086-21-60273582

Email：pioneer88mac@gmail.com

Skype:machineinfo8

ADDR：No.12,Jinshun Road, Airport Industrial Zone, Pudong New District, Shanghai,China