Home > Products > Co2 Fractional Laser Machine > Portable 30W CO2 Fractional Laser Stretch Mark Removal , Large Pores Treatment Machine
Portable 30W CO2 Fractional Laser Stretch Mark Removal , Large Pores Treatment Machine
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
Product Details
Brand Name: | HONKON | Place of Origin: | China | Model Number: | YILIYA-10600AL |
Product Description
Certification:CE
Portable 30W CO2 Fractional Laser Stretch Mark Removal , Large Pores Treatment Machine
Treatment TheoryFractional laser light penetrates the skin with tiny thermal channels through the random scanning. This creates an ablative and thermal effect on only these channels (a micro-injury) without damaging the surrounding tissue. The tissue surrounding the micro-injury sites (about 15-20% of the treatment area) starts the process of healing. As collagen remodels, skin tightened, scars improved and pigmented lesions removed.
Application I Application Range of Fractional treatment handpiece:1. Large pores, Fine lines, Skin tightening and whitening , Skin loosen (Deep Wrinkles), Stretch marks.
2. Various Scars: Burn Scars, Acne Scars, Surgical Scars and Keloid. Pigmented skin lesions: Chloasma, Freckles, Age spots, Sun spots, CAMLS.
3. Reconstruction of photoaging skin.
II Application Range of Incision Handpiece:1. Via multiple handles it can be adapted to Gynecology, ENT, Neurology and general surgery.
2. In Cosmetic Surgery, it can be adapted to incisions for Blepharoplasty, Skin Tags and ingrown Nails, Compound Nevus and Intra Dermal Nevus etc.
YILIYA-10600AH ADVANTAGES:1. Three modes of laser energy output are selective:Ultrapulse, CW and Fractional modes.
2. Adopt COHERENT RF-excited laser system enables the output quality more stable, more uniform, more consistent.(compared to ordinary CO2 laser installed with glass tubes)
3. Healing zone volume is adjustable, namely the volume of spots is adjustable in a certain healing zone.Therapists could adjust the spot density upon skin type, lesion parts and effectiveness requirement of different patients.
4. Various spot volumes are suitable for different area of the body which maximally avoid the side-effect that result from the overlap of the spot, reduce the pain during treatment, satisfy different therapists\' unique request.
5. 12.1\"TFT touch LCD, rotated 360 gives you a luxury enjoyment.
6. Reserved entry access for laser room ensures a safe treatment.
7. Comparing with existing traditional CO2 Sealed Glass Laser, RF excited CO2 lasts nearly permanently, therefore it deserves a higher initial cost which well be offset by a much lover total cost of ownership.
8. Variable focus tips can adust from 80um-2000um spot size which meet the need of surface or deep ablative of skin.
YILIYA-10600AH SPECIFICATION:
Laser Type |
CHERNT RF-excited CO2laser |
Wavelength |
10600nm |
Beam Delivery |
7-joint arm. |
Maximum Output Power |
30W/20W/10W(optional) |
Optical Beam Quality |
TEM |
Spot Size |
80um-2000um |
Power Of The Aiming Beam |
≦5mW |
Aiming Beam |
635nm |
Scanning Mode |
Randomized Scanning |
Laser Operating Mode |
UltraPluse, CW, Fractional |
Cooling |
Air Cooling |
Pulse Energy |
10mj-200mj(stepping :2mj) |
Pulse Interval |
2ms-100ms(steping:1ms) |
Scan Area |
5*5mm, 2.5*2.5mm , 1.25*1.25mm 30*30mm, 20*20mm, 10*10mm |
Power Supply |
AC 220V 50Hz/ AC 110V 60Hz |
Dimensions (Before Packaged) |
650mm*340mm*760mm |
Dimensions (After Packaged) |
760mm*455mm*975mm |
Net Weight |
41KGS |
Contact Us
- Beijing Honkon Technologies Company,
- Contact nameMiss. Xinghuan.Chen
- Phone86-010-56370065
- AddressBldg. 72, No. 16, Huanke Middle Rd Heze,Shandong
Co2 Fractional Laser Machine | Diode Laser Hair Removal | IPL Hair Removal Machine | ND YAG Laser Tattoo Removal |
- Captive screw YD-F5-M3/M4 series flush-mounted panelflat-headPhillips
- Fasteners Captive Screws Captive Nuts N7 Captive Nuts
- China supplier Tube male screw connector Q/D9111G-77 power plant spare parts
- China made Equal length double headed screw GB0000901G2085 for power plant
- China manufacture Screw plug Generator QFSN-200-2 for Power plant material
- China made double-head screw Generator TQN-100-2 Spare parts with COO/COM
- Captive screw YD-PF53-11-M3-0-BLseries flat-head slotted stainless steel
- Screws, wood screw, fastener, pins
- BMW Anti-theft screw,special drive, SS304 material,OEM & small order ok
- Ball head machine screw, made of SS304, OEM & small order welcomed
- Hex Socket cap screw/fastener/bolt, M6x80 mm, partial thread, made of SS 304. OEM & small order welcomed
- Modified Truss Head Self-Tapping Screws
- Pan Head Self Tapping Screw
- Csk Head Self Drilling Screw / Flat Head Self Drilling Screw Philips Head
- Self-Tapping Screws with Pan/Truss/Hex/Csk Head
- Hexagonal Head Self Tapping Screw with Washer Yellow Zinc
- Hexagonal Head Self Tapping Screw with Washer
- Modified Truss Head Self-Drilling Screws
- Pan Framing Head Self Drilling Screw (Serration Under Head)
- Pan Head Self Drilling Screw
- Csk Head Self Drilling Screw / Flat Head Self Drilling Screw Philips Head
- Hexagonal Head Self Drilling Screw with EPDM Assembled Washer
- Hexagonal Head Self Drilling Screw C1022 Yellow Zinc
- Hexagonal Head Self Drilling Screw C1022 White Zinc
Popular Searches
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Miss. Xinghuan.Chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-