Contact Platform Support
Help CenterElectromechanical Socket Energy Meter , Digital Electric Watt Hour Meter
Related Products
-
IEC Three Phase Electromechanical Energy Meter With ABS , Bakelite , PC Terminal CoverNegotiableMOQ: 1 Meter -
Square Class 1 or 2 Impulse Electromechanical Energy Meter With Single PhaseNegotiableMOQ: 1 Piece
-
Reactive Electronic Single Phase Energy Meter , Portable KWH Meter With Two WireNegotiableMOQ: 1 Set
-
Smart Three Phase Energy Meter With Single Rate Drum Register , 4 WireNegotiableMOQ: 1 Piece
-
Commercial / Industrial Reactive 3 Phase Energy Meter , KWH Meters With LCD DisplayNegotiableMOQ: 1 Piece
Certification:IEC, MID
Socket type Electromechanical Energy Meter for Residential applications
ADD8621 types single-phase watt-hour meters are of inductive types, used for measuring the active electrical energy of single-phase AC line whose reference frequency is 50(60)Hz. The meters should be fixed installed indoors (outdoors), the applicable environmental temperature is ?0?-50? relative humidity not exceed 85%, the ambient air should be free of corrosive gas, and the products should be kept away from dust, salt fog or condensation.
The technical indexes of watt-hour meter are in accordance with GB/T15283-1994, IEC521-1998 and ANSI C12.1-2001. The products not only have the advantages of FD type series, but also have the outline and wiring modes of the Occident conventional types, they can be conveniently wired in single-phase two-wire and single-phase three-wire lines, and have a good sale in the international market.
Structural features:
Base shell: polycarbonate injection, good insulation, and reliable installation;
Bed frame: aluminum-nickel-cobalt damping magnetic steel and silicon-aluminum alloy integrated casting, favorable strength and fine stability;
Electromagnetic elements: silicon steel sheet of high magnetic property, current-voltage iron core riveted by quick working punch, extended magnetic pole face, special heat treatment and so on enable the product to have wide voltage range, low power consumption, wide current load, high sensitivity, etc;
Rotating element and bearing: super-high purity aluminum sheet and magnetic bearing with rather low running wear enable the meter to run steadily and start up smoothly without creeping phenomenon;
Label: a special treated aluminum plate with favorable radiation protection capability;
Register: there are drum and pointer two types. It adopts micro diecast and casting plastic technologies, the register runs flexibly, with low frictional moment and stable running;
Shell: glass shell with super-high transparency. Technical parameters
|
Model |
ADD8621 |
|
Reference |
120V ;240V |
|
Current basic(The largest current) |
15(100) 30(200)A |
|
Hz |
50 or 60 |
|
Constant |
|
|
Counter |
5 whole black Analog drum and a wheel |
|
Kg |
1.6Kg |
Send Inquiry to This Supplier
You May Also Like
-
Resistor and PotentiometerNegotiableMOQ: 2500 Pieces
-
0.0001 Ohm Shunt ResistorNegotiableMOQ: 1000 Pieces
-
330K 1W 2W 5W DIP ResistorUS$ 1 - 2MOQ: 50 Pieces
-
Resistor,RJ26FW 331R 100% New and OriginaLUS$ 10 - 1,000MOQ: 100 Pieces
-
New Electrical Shunt 200A 75mV DC AC Current Shunt Resistor For Digital Amp Meter Analog MeterUS$ 1 - 100MOQ: 100 Pieces
-
Use for Audio Nonflatmmable Carbon Film ResistorUS$ 0.01 - 0.02MOQ: 5000 Pieces
-
AH Series - 5W Fixed Aluminum Housed WireWound ResistorsNegotiableMOQ: 100 Pieces
-
MLB-201209-0220PQ MULTILAYER TYPE HIGH CURRENT FERRITE CHIP BEADNegotiableMOQ: 1 Piece
-
China Best Selling Electrical Resistance EquipmentNegotiableMOQ: 100 Pieces
-
Electrical Popular Sell Potentiometer With Cheap PriceUS$ 0.40 - 0.40MOQ: 200 Pieces
