Home > Products > Injection Mould Parts > DME Injection Mould Parts , PU Plastic Injection Mold Swim Goggles
DME Injection Mould Parts , PU Plastic Injection Mold Swim Goggles
- 0 Set / Sets per Month
- T/T L/C D/P D/A
- 7 days
- High Quality Factory Direct Sale Multi-function brush cutter for Garden and Agricultural Use
- Hot Sale Brush Cutter with 2-Stroke, Air-forced cooling, Single Cylinder engine driven for Garden and Agricultural Use
- 1500mm Hydraulic Hedge Cutter Trimmer Mounted for Excavator / Tractor / Loader Diameter. of hedges and branches 40 mm
- Garden Tools Gasoline Brush Cutter 31CC Grass Trimmer For Sale
- factory Direct sales Gasoline hedge trimmer
- factory Direct sales Electric hedge trimmer
Product Details
Brand Name: | SHINY | Place of Origin: | China | Model Number: | SY-10071 |
Product Description
Certification:ISO9001: 2008
Injection Mould Parts , PU Plastic Injection Mould Swim Goggles
Quick Detail:
1. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
2. The part name: swim goggles (plastic injection mold)
3. Cavity material: H13 HRC48-52
4. Gate type: edge gate according to our customers requires.
5. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers\' requirements
7. Plastic material: PU (elastic plastic)
Description:
The part name: swim goggles
Sprue Radius: SR 1/2\"
Ejection type: ejection pin.
Mold type: plastic injection mold
Part Material: PU(elastic plastic)
KO Pattern: 7”x7”,
Locating ring Dimension: Ф3.99\",
Mold construction description: cold runner system, 2 plates, cavity insert need to pull out as mold open, moreover, two sliders first move, the other two sliders later move, then the product is ejected by the whole core, when mold close, the two sliders move firstly will later move, total 4 angle sliders, cavity ejection, core ejection.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
swim goggles (plastic injection mold) |
2.Plastic material |
PU |
3.mould base material |
S50C |
4.cavity material |
PU,H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
6.cavity number |
1 |
7.runner |
cold runner |
8.gate type |
Edge gate according to our customers requires. |
9.mould weight |
360 kg |
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers\' requirements |
11.cycle time |
40second |
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
software |
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |
14. File Formats |
Auto CAD (DWG), DXF, JPG or JEPG, PDF, Pro-E or Pro/Engineer(DRW,PRT), IGES, STEP,XTL,UG parts etc. |
15. injection molding machine |
About 120T plastic injection machine |
16. MOQ |
1 set |
17. payment |
T/T, To be negotiated |
18.package |
Wooden case or Wooden box with steel frame |
Contact Us
- shiny(HK)Industrial Technology Limited.,
- Contact nameMr. Jim Lee
- Phone86-0769-85355698
- AddressNO.4, XinFeng Rd, Shang sha Community, Chang an Town Dongzhuang,Shandong
Cold Runner Mold | Double Injection Mould | Hot Runner Injection Mould | Injection Mould Parts |
Plastic Injection Mould | Precision Injection Mould |
- 22.5cc gasoline hedge trimmer double-sided dual back and forth
- Paralleled Shape Plastic Rebar Supports , Plastic Heavy Concrete Rebar Chairs
- Electric Rebar Thread Rolling Machine
- Long Nose Self Tightening Grips Auto Body Pulling Clamps 2 Ton
- ZDR-0.3 380V 440V High Efficiency Marine Hot Water Tanks with 300L
- Chemical Product Air Freight service From China
- Dual Telescopic Magnetic Aluminum Waterproof LED Flashlight For Emergency
- 4-IN-ONE Long Pole Machines BC260 4 IN 1
- cordless hedge trimmer REHC52
- electric hedge trimmer E85HC
- cordless hedge trimmer REHC84
- petrol hedge trimmer HT230
- hedge trimmer E16HC2
- Safety Plastic Pneumatic Air Blow Gun , compressed air gun cleaning
- Medical And Pharmaceuticals High Performance Liquid Chromatography LC200
- Brand quality sports gloves
- Ductile Iron Water Meter Strainer DN50 ~ DN200 With Quick Open Cover
- 64mm 76mm R28 Reaming Drill Bit Stone Drill Bits CNC Milling
Popular Searches
Find Similar Products By Category
- Tools > Garden Tools > Hedge Trimmer
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. Jim Lee
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-