Contact Platform Support
Help CenterPPO Active Piezo Electric Buzzer Device 5V With Build-In Oscillating
Related Products
-
12 Volt Black PBT Active Piezo Buzzer 80dB, Size of D23*H9.5mmNegotiableMOQ: 1 Box -
Small External Piezoelectric Buzzers For Alarm , 1/2 Duty Square WaveNegotiableMOQ: 1 Piece
-
4000Hz 10V Piezo Electric Buzzer Components , 10CM Square WaveNegotiableMOQ: 1 Piece
-
Black PBT Pin Piezo Electric Buzzer 5V With Self Drive For ComputerNegotiableMOQ: 1
-
Wireless Piezo Electric Buzzer 5V , Sound 82dB Continuous ToneNegotiableMOQ: 1 Piece
Certification:ISO9001 TS16949
PPO Active Piezo Electric Buzzer Device 5V With Build-In Oscillating
Quick Detail:
1.Rated voltage: 5V DC
2.Maximum rated current: 10mA
3.Minimum sound output: 85dB at 10cm
4.Frequency: 4000Hz ± 500Hz
5.Tone nature: continuous
6.Operating temperature: -20 - +70°C
7.Storage temperature: -30 - +80°C
8.Weight: 1.3g
Description:
Specification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
1 | Rated Voltage | 5VDC |
2 | Operating Voltage | 3 – 12VDC |
3 | Rated Current | Max.10mA, at 5VDC |
4 | Sound Output at 10cm | Max.85dB, at 5VDC |
5 | Resonant Frequency | 4000±500 Hz |
6 | Tone | Continuous |
7 | Operating Temperature | -20 - +70℃ |
8 | Storage Temperature | -30 - +80℃ |
9 | RoHS | Yes |
10 | Weight | Approx 1 g |
*Housing Material: Black PPO
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
(4)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it
4.Electrical And Acoustical Measuring Condition
Recommended Setting
Recommended Test Circuit
Send Inquiry to This Supplier
You May Also Like
-
Antenna RFID Coil GEB175US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Slim Fit Crystal Cotton Belly Dance Practice Costumes Suit In Green , Purple , RoseNegotiableMOQ: 1 Piece
-
MINI BMW OPSNegotiableMOQ: 1 Piece
-
744761147C InductorsNegotiableMOQ: 1 Piece
-
13.56mhz Antenna RFID Coil GEB098US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Ferrite Antenna Coil GEB411US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Professional Ferrite Core Antenna Coil GEB393US$ 0.5 - 0.8MOQ: 1000 Pieces
-
Ferrite Coil Shenzhen GEB389US$ 0.5 - 0.8MOQ: 1000 Pieces
-
High Quality Solar Power Swing Coil GE093US$ 0.8 - 1MOQ: 1000 Pieces
-
Pancake Coil GE092US$ 0.8 - 1MOQ: 1000 Pieces
