Contact Platform Support
Help CenterWireless Piezo Electric Buzzer 5V , Sound 82dB Continuous Tone
Related Products
-
PPO Active Piezo Electric Buzzer Device 5V With Build-In OscillatingNegotiableMOQ: 1 Piece -
12 Volt Black PBT Active Piezo Buzzer 80dB, Size of D23*H9.5mmNegotiableMOQ: 1 Box
-
Small External Piezoelectric Buzzers For Alarm , 1/2 Duty Square WaveNegotiableMOQ: 1 Piece
-
4000Hz 10V Piezo Electric Buzzer Components , 10CM Square WaveNegotiableMOQ: 1 Piece
-
Black PBT Pin Piezo Electric Buzzer 5V With Self Drive For ComputerNegotiableMOQ: 1
Certification:ISO9001 TS16949
Wireless Piezo Electric Buzzer 5V , Sound 82dB Continuous Tone
Quick Detail:
Specification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 5～35℃, Humidity: 45%～85%R.H., Atmospheric pressure: 860 ～1060hPa) unless the standard condition (Temperature: 25±3℃, Humidity: 60±10%R.H. Atmospheric pressure: 860 ～1060hPa) is regulated to measure.
|
1 |
Rated Voltage |
5 VDC |
|
2 |
Operating Voltage |
5 – 14 VDC |
|
3 |
Rated Current |
Max.12mA, at 5VDC Max. 18mA at 12VDC |
|
4 |
Sound Output at 10cm |
Min.82dB, at 5VDC Min. 85dB at 12VDC |
|
5 |
Resonant Frequency |
4000±500 Hz |
|
6 |
Tone |
Continuous |
|
7 |
Operating Temperature |
-30 - +85℃ |
|
8 |
Storage Temperature |
-40 - +100℃ |
|
9 |
RoHS |
Yes |
|
10 |
Weight |
Approx 1.2 g |
*Housing Material: Black PBT
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10℃. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80℃ for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30℃ for 96 hours.
(4)Humidity Test
Temperature:+40℃±3℃ Relative Humidity:90%～95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70℃ /1hour→ 25℃/3hours→-30℃/1hour→ 25℃/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it
4.Electrical And Acoustical Measuring Condition
Recommended Setting
Recommended Test Circuit
Send Inquiry to This Supplier
You May Also Like
-
Battery and Battery PackUS$ 0.6 - 1500MOQ: 100 Blades
-
Untested Scrap Recycle Computer Hardware Used Laptop BatteryNegotiableMOQ: 10000 Pieces
-
32650 Rechargeable LiFePO4 3.2V 5000mAh Battery Cell for EnergyUS$ 5 - 10MOQ: 2000 Pieces
-
BATTERY FOR NDS NDS LITENegotiableMOQ: 10 Pieces
-
High Precision Battery Inner Resistance Tester Battery Internal Resistance MeterUS$ 1,000 - 2,000MOQ: 1 Piece
-
12v9ah Energy Storage BatteryUS$ 30 - 40MOQ: 1 Piece
-
RC Lead Acid Dry Motorcycle Battery 12VUS$ 5.33 - 5.9MOQ: 300 Pieces
-
Solar Generator With the Lithium-ion Battery S-1207US$ 20 - 500MOQ: 100 Pieces
-
Valve Regulated Battery 12V65AH BatteryUS$ 60 - 78MOQ: 1 Piece
-
Brand Women Thoracotomy Cycling Clothes Cotton Digital Printing Custom Processing (factory Direct)NegotiableMOQ: 1 Piece
