Contact Platform Support
Help Center400 Straightness Uniform Coating Brass Rubber Tube MIld Steel Wire Reinforcement 0.95mm
Related Products
-
Uniform Coating 99.2% Cu Rubber Tube Mild Steel Wire Reinforcement for Ocean 0.96mmNegotiableMOQ: 1 Piece -
High-pressure Mild Steel Wire Steel WIire Rubber Hose Reinforcement for Aviation 0.95mmHTNegotiableMOQ: 1
-
Brass-plated 98.3% Cu Mild Steel Wire Robber Hose Reinforcement for Machinery 0.96mmHTNegotiableMOQ: 1 Piece
-
Brass-plated 98.3% Cu Hose Wire Mild Steel Wire Robber Hose Reinforcement For MachineryNegotiableMOQ: 1 Piece
-
High-pressure Rubber Mild Steel Wire for Machinery Reinforcement Uniform Coating 0.78mmNegotiableMOQ: 1 Piece
400 Straightness Uniform Coating Brass Rubber Tube MIld Steel Wire Reinforcement 0.95mm
Specifications:
|
Description |
BEAD WIRE |
Reference |
GB/T14450- 2008 |
Diameter |
Φ0.95mm |
|
Item |
Standard |
Result |
|||
|
Diameter(mm) |
0.94-0.97 |
0.94-0.96 |
|||
|
Surface Quality |
Coating Smooth and uniform |
conform |
|||
|
Straightness |
≤400 |
120-400 |
|||
|
Yield ratio |
92.0-95.0 |
93.4-94.9 |
|||
|
Tensile(Mpa) |
≥1850 |
1980-2130 |
|||
|
Elongation(%) |
≥5 |
8.5-9.2 |
|||
|
Torsion(360°/200d) |
≥30 |
31-42 |
|||
|
Bronze coated(g/kg) |
0.35-0.65 |
0.40-0.50 |
|||
|
Cu (%) |
97-99 |
98.6-99.2 |
|||
|
No. of Joints |
2 |
0 |
|||
|
Sn (%) |
0.5-3.0 |
0.8-1.40 |
|||
|
Adhesion |
≥932N/50mm |
1496N/50mm |
|||
|
Assay of chemical contents |
|||||
|
C |
Mn |
Si |
P |
S |
|
|
0.70-0.72 |
0.5-0.60 |
0.17-0.30 |
0.006-0.015 |
0.005-0.017 |
Description:
Hose wire is also called steel wire for hose reinforcement, brass-plated steel wire, rubber tube wire, or brass rubber tube wire. It is used as the reinforcement layer of the rubber hose. These high-pressure rubber hoses could sustain high pressure and high impact, and they can be used for machinery, aviation, ocean, oil drilling and some other special occasions. The hose reinforcement steel wire is carried out in line with GB/T 11182-2006 Standard, We mainly produce hose reinforcement steel wire with the diameter of 0.20mm to 0.8mm. Other specifications according to customers\' requirements are also available.The surface of steel wire for hose reinforcement is plated a layer of uniform copper zinc alloy.The ratio of copper to zinc is 68±4%:32±4%.The tensile strength is mainly classified as three grades:2150-2450, 2450-2750, 2750-3050, 3050-3350N/mm2, the torsion value is more than 50 times, and knotting strength ratio is more than 58%. The weight of brass coating is heavier than 3.0g/kg. The steel wire has good line shape, the diameter of cast is no less than 120mm, and the helix is no more than 50mm.
Send Inquiry to This Supplier
You May Also Like
-
Turing F1280 High-Resolution IR Module: Precise Thermal Perception for Continuous OperationNegotiableMOQ: 50 Pieces
-
6，8" and 12"wafer FramesNegotiableMOQ: 500 Pieces
-
CH85 Microwave Oven 0.76ufNegotiableMOQ: 1
-
20kA Surge Protective Device SPD (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
-
3SE6020,100% New and Original,Hot Sales!!!NegotiableMOQ: 100 Pieces
-
Resonant Capacitors 1UF 3000VDC 2000VAC 70A 80AUS$ 18.6 - 27.8MOQ: 1 Piece
-
2.7v3000f the Capacitor Charge Circuit is Simple 2.7v3000f CapacitorUS$ 1 - 999,999MOQ: 6 Pieces
-
50V 220UF 50V220UF CapacitorUS$ 0.5 - 1MOQ: 200 Pieces
-
BNCHG Terminal Block Pin Connector for Over 12 Year ExperienceUS$ 0.35 - 0.4MOQ: 10000 Sets
-
Bimetal Thermal Switch 250V 5A-25ANegotiableMOQ: 1000 Pieces
