Pouch Cell Hot Pressing Shaping Machine

Hot-pressing machine for lithium battery cores

I .Technical Parameters:

1.Power supply:AC220V/50Hz;

2.Power:1.5 KW;

3.Air supply:0.5Mpa~0.8Mpa

4.Hot pressing area:200x200mm;

5.Pressure:1T (pressure can be adjusted);

6.Temperature control accuracy:±2°C;

7.Heating temperature:normal temperature~250°C can be adjusted;

8.Weight:About 80Kg;

9.Dimension:L 350x W 320x H 550mm;

10.Surface color:Gb warm grey 1C;

II .Method of Application:

The batteries die on a hot flat plate, press the start button to start the hot shaping machines, hot template driven cylinder pressure, make batteries heat, pressure setting, and then remove the batteries to complete.

III .Equipment components:

The machine consists of the following major components

1. Mechanical part: template body, the template mechanism, the hot plate body, insulation board bodies, the guide means, the housing

Rack institutions, agencies and other base

2.Electrical parts: screens, solid state relays, solenoids, photoelectric switches, etc.

3. Main components

Cylinder: SMC / AIRTAC

Heating pipe: Domestic quality

Linear bearings: NSK-made high-quality

Temperature controller: Omron (Japan)

Relay: Omron (Japan)