brushless fan 2 In 1 Soldering Station,hot air rework station

YIHUA 852D+ (brushless fan) 2 In 1 Soldering Station,hot air rework station  :

Feature:  

1.Sensors closed loop, zero-crossing triggering microcomputer temperature control,2 LED display, temperature accuracy and stability,without thewind effect, demolition real lead-free soldering.

2.Prompt facility and fault alarm ,like machine parts heating elements,circuit board etc. had fault,rework station will alarm fault signal ,prompt workers have checked the machine.

3.Airflow can adjustable,a large amount of gentle wind, temperature regulation, it can adapt to multiple use.

4.The handle equipped with a sensor switch, as long as the grip handle, thesystem can quickly enter into the working model; handle back into the handle frame, the system will enter standby mode, real-time operatingconvenience, meanwhile may be extended heater life.

5.The system has automatic cold wind feature to extend life and protect the hot air gun.

6.Use brushless fan, extremely life, low noise, use high-quality heatingelements, it durable and effectively extend the service life of heating elements and power savings.

7.Air gun heating elements use the latest technology(skeleton type),highquality heater production, superior to the similar heater in the market.

8.Air gun heater use high-quality ceramics heater, heating rapidly and long service life.

9.ESD design, to prevent electrostatic damage to the delicate SMDcomponents.

MAIN FUNCTION

1. SAMSUNG microcomputer control,warming-up quickly.

2. Adjust the air flow and temperature control rotation.

3. Refer to the instructions included with three kinds of nozzles (big,medium and small) replacement part.

4. Would replace the part if the resistance value is incorrect.

5. When the temperature is less than 70 degree , can stop rotation automatically.

6. Intelligent system that could alarm , Fault detection automatically

7. High-quality resistance good for long service life

8. Safe solder QFP, PLCC, BGA and other temperature-sensitive components.

9. Intelligent detection and cool airflow features.

10. Green lines and high-quality silicone body heat good for extend life and save power.

Technical data:

*What difference for brushless fan and diaphragm pump?
diaphragm pump the air are focus , airflow are 24~28L/min. brushless fan the air are soft ,airflow are 120L/min.

Remark: Specifications and design subject to change without notice

What\'s in the box : 
 

* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder
* 3 nozzles

These are 220V units, you may need a transformer to use the machine in your country. we also do accept special orders for 110V  / 230V/ 240V units  

Our warranty

*Credit Safeguard