Contact Platform Support
Help CenterInjection Pipe Fitting Mould With Cold Runner CUMSA , Progressive
Related Products
-
Plastic Injection Mould Parts Stripper Plate and Sub GateNegotiableMOQ: 1 Metric Ton -
Cold Runner Plastic Injection Mould Parts For Bushing / PP DME BaseNegotiableMOQ: 1 Set
-
Plastic Injection Hot Runner Mould Parts For AutomobileNegotiableMOQ: 1 Kilogram
-
PMMA Plastic Injection Mould Parts Hot Runner For Turntable PartsNegotiableMOQ: 1 Piece
-
Two Plate Injection Mould Parts For Pipe Fitting With 2 CavityNegotiableMOQ: 1 Metric Ton
Certification:ISO9001: 2008
Injection Pipe Fitting Mould With Cold Runner CUMSA , Progressive
Quick Detail:
1. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
2. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers\' requirements
3. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
4. Cavity material: H13 HRC48-52
5. Gate type: sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Plastic material: PP
7. The part name: pipe fitting (plastic injection mold)
Description:
Part Material: PP
The part name: pipe fitting
Mold type: Plastic Injection Mould with cold runner system
KO Pattern: 200*200
Locating ring Dimension: Ф100
Ejection type: lifter ejection
Sprue Radius: SR 19
Mold construction description: Hot runner system, 3 inner sliders and 2 outer large sliders, 3 lifters and 2 plates, many shut off area in the mold, Explosion core.
This product is made of PP plastic material and it is one of the components of the reputable brand pipe fitting. The construction is complicated and there are 6 small sliders in the cavity, 6 lifters and 2 big sliders in core side in the mold, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with water cooling system and the part can be molded by both automatically and manually.
This part has high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
|
pipe fitting (plastic injection mold) |
|
Plastic material |
PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
cold |
|
8.gate type |
sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
360 kg |
|
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers\' requirements |
|
11.cycle time |
40second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
13.des |
Send Inquiry to This Supplier
You May Also Like
-
Tree Planting Machine Post Hole DiggerUS$ 500 - 1,000MOQ: 1 Set
-
TLS-02 Outdoor Camping Shovel Mini Multifunctional Survival ShovelUS$ 1.9 - 2.9MOQ: 100 Pieces
-
Shovel With HoleUS$ 1 - 200MOQ: 10 Pieces
-
Car Plastic Snow ShovelUS$ 0.8 - 1.1MOQ: 1000 Pieces
-
Plastic Snow ShovelUS$ 1 - 3.9MOQ: 5000 Sets
-
Snow Shovel Set,gardon Tools ,plastic ShovelNegotiableMOQ: 2000 Sets
-
Snow Shovels Convenience High QualityUS$ 13 - 20MOQ: 1000 Pieces
-
SD0194 Hot Selling Colorful Bottle Pure Color Eco-FriendlyUS$ 0.54 - 1MOQ: 3000 Pieces
-
Non-Sparking Brass Round Point Shovel ,Explosion-proof Aluminum Bronze SpadeUS$ 9.04 - 11.56MOQ: 1 Unit
-
D-Handle Poly Snow Scoop Snow ShovelsUS$ 2 - 5MOQ: 1000 Pallets
