Telecom Cisco 3750-X Power Supply Rectifier, Cisco 3560-X Switch Power Supply Modules
Certification:CE
Cisco 3750-X Power Supply and Cisco 3560-X Switch Power Supply Modules
The Cisco 3750-x and Cisco 3560-x switchs operate with one or two C3KX-PWR-350WAC 350W AC power supplies. In addition the switches can run with power supplied by an expandable power supply, XPS-2200. A Cisco 3750-X switch which is connected to a StackPower stack is powered by other stack switches. You can use two AC modules, two DC modules, one AC and one DC module, or one module and a blank cover.
All C3KX-PWR-350WAC 350W AC power supply modules have internal fans. All switches ship with a blank cover in the second power supply slot.
The XPS-2200 has two modes:
•In StackPower mode, it supplies power to the switches in the power stack (only Catalyst 3750-X switches with IP Base image).
•In expandable power supply mode, it supplies power to a switch when the switch power supply is removed or fails. When you install or replace a power supply module, the switch software polls the device. After polling, the power supply module provides power to the switch, and the XPS-2200 is available to power other devices.
The C3KX-PWR-350WAC 350W AC power supply modules are autoranging units that support input voltages between 100 and 240 VAC. The 1100-W power supply module is an autoranging unit that supports input voltages between 115 and 240 VAC. The 440-W DC power supply module has dual input feeds (A and B) and supports input voltages between 36 and 72 VDC. The output voltage range is 51 to 57 V.
Each C3KX-PWR-350WAC 350W AC power supply power supply module has a power cord for connection to an AC power outlet. The 1100-W and 715-W modules use a 16-AWG cord (only North America). All other modules use an 18-AWG cord. The DC power supply module must be wired to a DC power source.
|
Model Number |
C3KX-PWR-350WAC |
|
Manufacturer |
Cisco |
|
Power consumption |
350 W |
|
AC input voltage |
100 - 240 volts |
|
AC input frequency |
50/60 Hz |
|
Weight |
1250 g |
|
Mean time between failures |
500000 hours |
|
Safety |
UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, |
|
Operating temperature range |
-5 - 45 ° C |
|
Storage temperature range |
-40 - 70 ° C |
|
Operating humidity range |
5 - 90% |
Send Inquiry to This Supplier
You May Also Like
-
Quick Connector for Power Cables – Dedicated to Cable FeedersUS$ 3 - 10MOQ: 5 Combos
-
Flanged Waterproof Sealing Hydraulic Dust Proof Cap for 7/16 Din Male Plug PlasticNegotiableMOQ: 100 Pieces
-
Wire to Wire ConnectorNegotiableMOQ: 2300 Pieces
-
Auto Electrical Connector Right Angle RC30601 – IP54/IP67 Optional, Compatible With 0.5-1.0mm² Automotive WiresNegotiableMOQ: 1000 Pieces
-
USB ConnectorUS$ 0.01 - 0.03MOQ: 10000 Pieces
-
WII AV ADAPTORNegotiableMOQ: 10 Pieces
-
Wago Terminal Block With Vde 3.5 mm ScrewlessUS$ 0.0162 - 0.0209MOQ: 10000 Poles
-
Good Service no Quality Discrepancy Trade Assurance ConnectorsUS$ 0.05 - 0.5MOQ: 1000 Pieces
-
1pcs 3.5mm Male AUX Audio Plug Jack To USB 2.0 Female Converter Cable Cord Car MP3 NewesUS$ 1 - 100MOQ: 100 Quarts
-
Three Hole ConnectorNegotiableMOQ: 1