Pulley Lagging Metal Primer SK363
When do pulley lagging for driver drum and redirection drum, to improve the bonding strength between rubber sheet and the drum , we must brush metal primer SK363.
Metal primer will form one coat transition layer between metal and rubber sheet, so that it will improve metal surface bonding activity.
Metal primer SK363 is mainly used for driving drum cold pulley lagging in power plant, cement plant, coal mine, steel mills.
are also used in rubber lining on metal surface which need bond rubber to metal.
Operation method:
It is very easy to use,firstly roughen drum surface, made metal surface rustless and rough, we suggest that the buffing depth is 30 um.
Then use the cleaning agent to remove greasy dirt. After drum is dry,brush one thin coat metal primer evenly.
Wait approx. 10-30 minutes,bursh two coats cold vulcanzing adhesive SK313, also brush one coat cold vulcanizing adhesive SK313 on rubber sheet which is with
one coat CN bonding layer . When the adhesive are slightly sticky,bond rubber sheet and metal drum.Then use rubber mallet to hit them firmly.
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale Polyether-based TPU Material TPU Granule for Ski BootsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons