14mm Film Faced Plywood

1.Big Size:The biggest size is 2440×1220mm, 915×1830 mm, which could decrease the numbers of the joint and increase the working efficiency. And the planking will not deform and crack, it can resist water well, re-use many times and demoulds easily, about 1/7 of steel planking.

2.Light weight:It is more suitable for high-rise building and bridge construction.

3.Re-use number:For Melamin glue, usually can be used zhout 8 times, and for WBP glue, can be re-use above 15 times.
4.Concrete building:It can keep the surface smooth and beautiful when used for pouring, and you don’t need to plaster the wall for second time, for it can decorate directly that will decrease the construction period by 30%.

5.Corrosion resistance:It will not pollute the surface of the concrete.

6.Good moisture-retention:It is good for construction, and in Winter it can be used as template for curved surface.

7.Good workability:It is better than bamboo plywood and small steel plywood in terms of nailing, sawing and drilling, it can be processed to template with all shapes according to needs.

thickness 12mm,13mm,14mm,15mm,16mm,17mm,18mm

size: 1220*2440 915*1830 mm

core: poplar

glue: WBP and Melamine

CONSERVE AND MAINTAIN:

HOW TO CUT THE BEST FROM OUR FILM FACED PLYWOODSTORAGE
Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If Faced Film Plywood panels are wet, do not allow them to dry too rapidly.
SEALING OF EDGES
Phenolic fabric film faced plywood edges are fully sealed in the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
SEALING OF HOLES
Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.