Contact Platform Support
Help CenterElectrostatic Spraying Powder Coating Line Project For Metal Industry
Related Products
-
1.0 - 5.0m/min Complete Powder Coating Plant For Aluminum ProfileNegotiableMOQ: 1 Metric Ton -
Semi-automatic Powder Coating Line , Powder Spraying LineNegotiableMOQ: 1 Set
-
Powder Coating Line , Cyclone Second Class Recovery SystemNegotiableMOQ: 1 Metric Ton
-
Automatic Electrostatic Powder Coating Line For Car Brake Pads OEMNegotiableMOQ: 1 Set
-
High Efficiency Vertical / Horizontal Powder Coating Plant EquipmentNegotiableMOQ: 1 Kilogram
Certification:ISO /CE
High Quality Automatic Powder Coating Line
1. Pretreatment : To get rid of the workpiece surface oil, dirt, rust and in the workpiece surface
2. Electrostatic spraying : Powder coating evenly spray to the surface of the workpiece
3. High temperature curing : heating to the specified temperature and heat preservation corresponding time, melting, flow flat, curing.
4. Decoration processing: achieve a kind of special appearance
Electrostatic Spraying Powder Coating Line Project For Metal Industry
Electrostatic Spraying Process
1. Pretreatment
Objective: To get rid of the workpiece surface oil, dirt, rust and in the workpiece surface generating a layer of corrosion resistance and can increase the spraying coating adhesion \"phosphating layer\".
Main technological steps: In addition to oil, rust removal, phosphating and passivation. The workpiece surface after treatment before not only no oil, rust, dust and the original silver luster surface generating a layer of uniform and the rough is not easy to rust grey phosphating film and can increase the coating layer adhesion.
2. Electrostatic spraying
Objective: Powder coating evenly spray to the surface of the workpiece. The special work (including easy to produce electrostatic shielding position) should be using the high performance electrostatic spray molding machine to complete the painting.
Process steps:
Using electrostatic adsorption principle in the surface of the workpiece evenly spray on a layer of powder coating. Falling powder through the recovery system recovery and sieve used again.
3. High temperature curing
Objective: The workpiece surface of powder coating heating to the specified temperature and heat preservation corresponding time, melting, flow flat, curing.
Process steps: Spraying good workpiece push curing oven, heating to the predetermined temperature (usually 185 degrees) and heat preservation corresponding time (15 minutes). Blow on take out cooling namely get finished.
4. Decoration processing
Objective: Make after electrostatic spraying after the workpiece to achieve a kind of special appearance (all kinds of wood grain, decorative pattern, such as honor).
Process steps: Finish, transfer and treatment process.
Send Inquiry to This Supplier
You May Also Like
-
Aluminium Pesticide Pot (250 Ml)NegotiableMOQ: 5000 Pieces
-
Aerosol InsecticideNegotiableMOQ: 1
-
Efficient and Quick Manufactuing Insecticide Lambda Cyhalothrin 95%TCUS$ 25 - 26MOQ: 1 Kilogram
-
Medical Solvent Methyl Oleate IntermediateUS$ 1,269 - 1,397MOQ: 1 Metric Ton
-
Fluidized Granulator Drying EquipmentUS$ 39,684 - 66,000MOQ: 1 Set
-
2% Iodine Oligosaccharide Acids ( New Generation Fungicide Agent)US$ 2,800 - 2,800MOQ: 1 Ton
-
Pet Paraquat Seal Wad for PesticidesUS$ 0.01 - 0.06MOQ: 1000000 Pieces
-
Factory Directly Sell Ascophyllum Nodosum Seaweed ExtractNegotiableMOQ: 1 Ton
-
Wholesale Price Chemicals Pesticide Insecticide Acetamiprid 20%SP for Cumin ThripsUS$ 5 - 8MOQ: 1 Kilogram
-
Amino Acid Powder 90% Yellow Powder Total Nitrogen 13% Free Amino Acid 20-40% Raw MaterialUS$ 2552 - 2689MOQ: 1 Ton
