Contact Platform Support
Help Center100Hz, 0 - 10V / 0 - 5V DC Industrial Signal Switch Signal Isolation Amplifier With Ceramic Base,
Related Products
-
Small 0 - 10V / 0 - 5VDC, 100Hz Signal Conditioning, Converted and Isolation AmplifierNegotiableMOQ: 1 Piece -
0 - 10V / 0 - 5V DC High Powered Signal Isolation Amplifier IC for Ground Interference ControlNegotiableMOQ: 1 Meter
-
3000VAC Signal Isolation Amplifier IC for Equipment and Sensor Signal Acquisition, 0 - 10V / 0 - 5NegotiableMOQ: 1 Piece
-
Signal Isolated Pwm Pulse Width Converter / Amplifier / Long-Term Transmission For Industrial PLC /NegotiableMOQ: 1 Kilogram
-
3000VDC Pulse Width Converter / Amplifier / Transmitter, 4-20ma Pwm Signal Isolation TransmitterNegotiableMOQ: 1 Meter
Certification:ISO9001-2008, CE, RoHS
100Hz, 0 - ±10V / 0 - ±5V DC Industrial Signal Switch Signal Isolation Amplifier with Ceramic Base, SMD
ISO 1001 isolation amplifier IC integrates a high isolated DC/DC power supply and a high-powered isolated amplifier. It also provides a group of isolated dc power supply and two 5V base voltage supply for use of exterior circuit extending, like electric bridge circuit and other circuits. Input and output isolated voltage is 3000VAC.ISO-1001 Isolation Amplifier IC is very easy to use; just a few external components are required.
Applications:
●Analog signal data acquisition
●Industrial signal switch
●Ground interference control
●Equipment and sensor signal acquisition
●Signal long routed transmit
●Isolated safe bar
Specifications:
●Power supply Signal: input/output 3000VDC isolation
●Wide signal bandwidth:100Hz
●Power:5VDC,12VDC,15VDC or 24VDC
●:0~±10VDC Signal isolate amplifier
(nonlinearity<0.2%)
●Two groups of basic voltage power supply (isolate 5VDC)
●Ceramic base, SMD
●Super small footprint, standard DIP24
●Weldable to PCB directly and DIN Rail-mounted
Maximum Input Characteristic:
If input value is over above range, it may cause permanent
|
Continuous isolated voltage: 3000VDC |
|
Power supply voltage input range: 25%Vin |
|
Soldering temperature (10 seconds): +300℃ |
|
Output minimum load: 2KΩ |
Electric performance index 1:
|
Parameter |
Terms |
Min |
Typ |
Max |
Unit |
|
Isolated enduring voltage |
10s |
3000 |
VDC |
||
|
Gain |
Pin1 and Pin2, Pin13 and Pin 14 short circuit |
10 |
V/V |
||
|
Gain vs Temperature |
±50 |
ppm/℃ |
|||
|
Nonlinearity |
±0.1 |
±0.3 |
%FSR |
||
|
Input maladjust voltage |
±1 |
±5 |
mV |
||
|
Signal input |
0.01 |
0.5 |
1000 |
V |
|
|
Signal output |
5 |
V |
Electric performance index 2:
|
Parameter |
Terms |
Min |
Typ |
Max |
Unit |
|
Frequency response |
| Vin <500mV |
200 |
Hz |
||
|
Load capability |
VOUT=5V |
2 |
|||
|
Signal input ripple |
No ripple |
Send Inquiry to This Supplier
You May Also Like
-
High Linearity PWM Pulse Width Signal Isolated Converter / Amplifier for Input / Output Signal 3000VNegotiableMOQ: 1 Piece
-
Small Isolated PWM Pulse Width Converter / Amplifier for Industrial PLC Control and Inverter ControlNegotiableMOQ: 1 Piece
-
0-10mA / 4-20mA / 0-5V / 0-10V AC Signal Isolated Amplifier / Transmitter For Ac Signal AcquisitionNegotiableMOQ: 1 Set
-
Ground Interference Control, DC Signal To Isolated Frequency Pulse Signal Converter / TransmitterNegotiableMOQ: 1 Piece
-
Frequency Signal Isolated Converter / Transmitter For Sine Wave, Square Wave, Saw Tooth WaveNegotiableMOQ: 1 Meter
-
Small RTD Temperature Transmitter / RTD Isolated Signal Isolated Converter For High-Precision TemperNegotiableMOQ: 1 Piece
-
Temperature Signal Isolation Amplifier / Transmitter for Temperature Signal Isolation, Acquisition aNegotiableMOQ: 1 Set
-
RTD Isolated Signal Isolated Converter / RTD Temperature Transmitter for Ground Interference SuppresNegotiableMOQ: 1 Piece
-
Isolated Signal RTD Temperature Transmitter / Converter for Temperature Signal Isolation, AcquisitioNegotiableMOQ: 1 Piece
-
Integrated Circuit Signal Isolated Transmitter for Potentiometer Signal Acquisition / Isolation andNegotiableMOQ: 1 Piece
