Contact Platform Support
Help CenterMold Temperature Control Unit 120kw Heating Power For Electric Arc Furnace / Boring Machine
Related Products
-
Mold Temperature Control Unit Oil Circulation System For Wood Presses, Rubber Presses, Jacketed VessNegotiableMOQ: 1 Set -
No - Fuse Breaker Mold Temperature Control Unit, No-voltage Exhaust Protection System AEOT-75-80NegotiableMOQ: 1 Set
-
AEOT-75-40 Mold Temperature Control Unit For Wood Presses / Molding Presses / Rubber PressesNegotiableMOQ: 1 Set
-
60kw Heating Power Mold Temperature Control Unit / Mold Temperature Machine Aeot-50-60 By-PassNegotiableMOQ: 1 Piece
-
AEOT Customized Mold Temperature Control Unit 300 for Pasta Machine / Cold Rolling MillNegotiableMOQ: 1 Piece
Certification:CE & ISO9001:2000
Mold Temperature Control Unit 120kw Heating Power For Electric Arc Furnace / Boring Machine
AEOT-100-120 Mold Temperature Control Units(MTC) are used to preheat a process to the desired operating temperature by engaging the unit\'s electric immersion heater and recirculating the oil in the system. Oil type MTC circulate high temperature heat transfer fluid through the process application for temperature control. AEOT-100-120 offer the range of temperature control from 25°C to 300 °C.
SAFETY PROTECTIONS:
No-fuse breaker for the overcurrent phenomenon of general power supply. Motor reversion protection and indicator light up. Cooling water lacking protection and indicator light up. Circulating pump overload protection and indicator light up. BY-PASS pressure release loop for hot oil. Phase failure protection. High-voltage explosion-proof device. Anomaly explosion-proof buzzer. Prevent dry combustion device, discharge scale deposit protection. No-voltage exhaust protection system.SPECIFICATION DETAILS:
|
No. |
Part |
Specification |
Data |
|
1 |
model |
AEOT-100-120 |
|
|
2 |
power supply |
3N-380-50HZ |
|
|
3 |
Hot medium |
oil |
|
|
4 |
control mode |
PC board Self - optimized microprocessor |
|
|
5 |
accuracy of temp. control |
PID±1℃ |
|
|
6 |
Max. temperature |
300℃ |
|
|
7 |
Min. temperature |
25℃ |
|
|
8 |
heating power |
120KW(adjustable) |
|
|
9 |
heat exchange area |
0.1M2 |
|
|
10 |
Pump |
model |
SAP65-40-200 |
|
power |
7.5KW |
||
|
lift |
50M |
||
|
flow |
25M3/hr |
||
|
11 |
heating method |
Direct heating(Indirect cooling) |
|
|
12 |
Pipeline |
hot medium inlet/outlet |
DN50(adjustable) |
|
cooling water inlet/outlet |
DN15(adjustable) |
||
|
drain oil port |
DN15(adjustable) |
||
|
13 |
Temp. Controller |
model |
P6100(WEST) |
|
modulating action |
Dual PID control of heating & cooling |
||
|
Temp. interaction stick |
K- thermocouple |
||
|
display status |
Respectively display set point & real point |
||
|
output select |
SSR output |
||
|
14 |
Send Inquiry to This Supplier
You May Also Like
-
SCAIR 60HP 1.2MPa GMP Compressor for Pharma Isolators & Lyophilizer SystemsNegotiableMOQ: 1 Unit
-
SCAIR 75HP 1.2MPa Automotive Paint Compressor for Class A FinishesNegotiableMOQ: 1 Unit
-
SCAIR 100HP 1.2MPa Cement Plant Compressor for Kiln Burners & Clinker CoolersNegotiableMOQ: 1 Unit
-
SCAIR 10HP 0.8MPa Dental Compressor for Surgical Handpieces & Sterilization AutoclavesNegotiableMOQ: 1 Unit
-
SCAIR 20HP 0.8MPa Pharma Compressor for Blister Sealing & Serialization SystemsNegotiableMOQ: 1 Unit
-
SCAIR 30HP 0.8MPa Textile Compressor for Air-Jet Weaving & Dyeing AutomationNegotiableMOQ: 1 Unit
-
SCAIR 50HP 0.8MPa Brewery Compressor for Carbonation Control & Can Seaming SystemsNegotiableMOQ: 1 Unit
-
SCAIR 60HP 0.8MPa Marine Compressor for Ballast Water UV Sterilization & ElectrochlorinationNegotiableMOQ: 1 Unit
-
SCAIR 75HP 0.8MPa Aeration Compressor for Wastewater Treatment & Membrane BioreactorsNegotiableMOQ: 1 Unit
-
SCAIR 100HP 0.8MPa Aquaculture Compressor for RAS Oxygenation & Live Harvest SystemsNegotiableMOQ: 1 Unit
