Accurl Hydraulic Guillotine Shearing Machine

accurl hydraulic guillotine shearing machine

aluminum guillotine shearing machine
amadam CNC guillotine shear
1. The frame is steel welded structure, have sufficient strength and rigidity, eliminate internal stress and high frequency vibration, to ensure the overall accuracy of the fuselage. Has a good rigidity, two cylinders fixed on the left and right columns (wallboard).
2 .Tool carrier for welded steel plate box-type structure, has a good rigidity, high-frequency vibration to eliminate internal stress, through the rear pivot point gap adjustment device for the center, and can quickly adjust the blade gap. Three-point support rolling clamping rail, and to maintain good accuracy, the tool carrier running smoothly, and can quickly adjust the blade gap.
3. Shearing machine blades, four blade edges can be used, our blades is shanghai brand, just 3/1000 feedback, long service life.
5 Shearing machine blades using 6CrW2Si, high quality materials, and all heat-treated, to ensure that it has sufficient hardness and long service life.
6. ELGO P40 CNC controller control three axis back gauge, shear angle and blade gap.
7. QC11Y hydraulic guillotine shearing machine can be adjusted shear angle and blade gap. QC12Y hydraulic swing beam shearing machine just be adjusted blade gap.
8.Because your material is stainless steel, so our engineer recommend QC11Y guillotine shearing machine.
1
 Shear Max Thickness
 mm
 10
 
2
 Max width
 mm
 3200
 
3
 Travel times
 times/min
 ≥10
 
4
 Stopper adjust range
 mm
 600
 
5
 Cutting angle
 °
            0.5-2.5
 
6
 worktable height
 mm
 800