0.3-5X1600 Automatic Cut to Length Line/cutting line

Detailed Product Description

 Automatic Slitting and Cut to Length Line  

Technical parameters

1. specifications

a. application   stainless steel

b. tensile strength    δb≤510Mpa

c. material thickness   0.3-5mm

d. material width    1500mm(Max)

e. coil I.D     φ508-φ610mm

f. coil O.D      φ1500mm(Max)

g. coil weight      15T(Max)

h. diameter of leveling roller   125mm

i. distance of leveling roller     135mm

j. material of leveling roller     42CrMo,  hardness: HRC52-60

k. diameter of slitting blade pivoT    220 material    40Cr

l. slitting blade   220×360×20

m. material of slitting blade   SKD

n. hardness of slitting blade    HRC52°-58°

o. recoiler I.D of waste materials       420

p. slitting strips(Max)   6 strips of 5mm- thickness

2.other parameter

a. power: 380V/50Hz/3Ph

b. line speed: 0-30m/min

c. total power: about 160Kw

d. area of the producing line(about): 35m (length) ×8m (width)

e. operators: one skilled worker and two general workers

f. color of the equipment: grass green

   Composed device

Hydraulic coil car

Hydraulic cantilever decoiler

Coil guide and pinch roll device

Slitting machine

5×1600 shear machine

Side guide device

Straightener

Hydraulic X-shaped lifting table( unload the material)

Hydraulic control system

Electronic control system

.Brief introduction of the equipment

ZJPX-(0.3-5)×1600 the decoiler—slitting-straightening-cut to length-piling line,mainly used for the uncoiling ,slitting, straightening and cutting to length of carbon steel rolls and preparing the materials for the next processing units.

Jeaney
Mail: salesc@wxbangzhou.cn
Fax:86 0510 86928783
Tel: 86 0510 6307396
website: