Simple HR slitting line FJ-3X1250

Detailed Product Description

1.Thickness of coiled plate: 0.2-1.5mm;
2.Width of coiled plate: 500-1250mm;
3. applied to all the common carbon steel

1. Material of processible coiled plate: apply for carbon steel plate 450Mpa;
2. Thickness of coiled plate :0.2—1.5mm;
3. Width of coiled plate slitting 500-1250mm;
4. Precision of slitting   width tolerance: ±0.02mm;
5. Slitting speed  0—30m/min ;
6. Loading capacity of uncoiler machine(feeding machine) : 8T;
7. Coil I.D  450-510mmmm;
8. Coil O.D  900-1200mm;
9. Knife pivot diameter of slitting  120mm;
10. Slitting  blade 120×220×15; 10pcs
11. Material of slitting blade  9CrSi;
12. Hardness of blade  HRC58°—60°;
13. Recoiler I.D  508mm;
14. Power  380V three-phase electricity 50Hz;

 

II.  Composed Devices

1.  Decoiler

      ----To open the coil shaped material into the plate shaped            

  

 

2.  Side guide  device

     ----To guide the plates right into the next process to improve the slitting precision

 

3.  Slitting machine

      ----To slit the wide plates into several narrow strips as per your special need.

 

4.  Scrap winder

     ---- To wind the waste material which is left on the both edge of the plates

 

5.  Tension stand

     ----To create the tension stress and pre-dividing the finished strips to ensure the tight and even quality of the recoiling part

 

6.  Recoiler

     ----To rewind the finished coils 

 

7.  Electrical  system

     ---- To make sure the operation of the whole line and adjust the speed. 

 

Jeaney
Mail: salesc@wxbangzhou.cn
Fax:86 0510 86928783
Tel: 86 0510 6307396
website: