Contact Platform Support
Help CenterPermanent Adjustable Semi-diameter Arced Concrete Column Formwork for Curved Wall
Related Products
-
High Standard Steel Frame Adjustable Semi-diameter Arced Concrete Column FormworkNegotiableMOQ: 1 Piece -
800 800mm Adjustable Square Rectangle Concrete Column Formwork With Plywood, Timber BeamNegotiableMOQ: 1 Set
-
Square Adjustable Suspended Slab Concrete Column Formwork for Variational DimensionNegotiableMOQ: 1 Square Meter
-
Adjustable Concrete Column Formwork With Square or Rectangle With Vertical WalingNegotiableMOQ: 1 Roll
-
Insulated Concrete Column Formwork Composed of Plywood, Timber Beam, Vertical WalingNegotiableMOQ: 1 Set
Certification:ISO9001-2008
permanent Adjustable Semi-diameter Arced Concrete Column Formwork for curved wall
Descrition:
It can be used for any curved wall with the semi-diameter longer than 1.10m
Adjustable acted Formwork Profile
Adjustable Semi-diameter Arced Formwork On the basis of the foreign company technology, we developed
the Adjustable Semi-diameter Arced Formwork, which can be used for any curved wall with the
semi-diameter longer than 1.10m. Traditionally, the formwork is produced in accordance with
the designed semi-diameter, which is one-off use, causing much materia
l wasting. All the defects of the traditional formworks are overcome after we developed the Adjustable
semi-diameter arced formwork. Also, we lease the formwork out to the contractors to save their cost,
which proves good effect. Adjustable acted Formwork\'s panel is 18mm
Plywood,because the panel specification is 2440×1220 mm,so the formwork
max width is 2440mmUpright rib is combination steel frame ,the panel and the steel frame is connected by
bolt ; Horizontal rib is short Double-side V-iron , there are adjustable connectors
between V-iron.Upright side-rit is angle steel .The radius can be regulated at any time when
meet to different section. Adjustable Acted Formwork Technique parameter: Allowed Load50-70KN/M2
Per square meter65KG
Advantage of the product
Can be adjusted to any curved wall with a semi-diameter longer than 1.1m
Easy and quick operation.
Low cost and wide use.
High standard elements.
Assembly procedure
1. Assemble timber beam and timber connector.
2. Assemble plywood and edge rib.
3. Assemble adjustable system.
4. Assemble connecting waling.
5. Adjust the formwork, make the formwork bent into designed radius.
6. Connect every module by adjustable steel clamp.
One plan sketch is shown below
Send Inquiry to This Supplier
You May Also Like
-
4 Lifting Capacity Building Construction Tower Crane , 160 x 160 x 14 Angle SteelNegotiableMOQ: 1 Piece
-
HZR115 Plate CompactorNegotiableMOQ: 1 Set
-
Hydraulic Road Roller (XD121)US$ 87,000 - 88,000MOQ: 1 Unit
-
Single Mini Drum Vibratory Roller With Lutong Brand in China LTD214BUS$ 1 - 1,000MOQ: 1 Unit
-
2.5-4Tons Road RollerNegotiableMOQ: 1
-
Hydraulic Double Drum Vibratory Road RollerUS$ 53,385 - 63,265MOQ: 1 Piece
-
Liugong Parts Brake Light Switch 34B0253 for Road RollerUS$ 3.19 - 3.98MOQ: 1 Piece
-
Wear Resistant PU New Road Roller PriceUS$ 5.36 - 450MOQ: 5 Pieces
-
Road Roller Single Wheel Road Roller Elegant Design Cheap Price Structural Durability Road RollerNegotiableMOQ: 1 Piece
-
New Road Roller Price For SaleUS$ 1,999 - 5,000MOQ: 1 Set
