H Beam Welding Line Using SAW Welding, Beam Welding Machine

.Performance

MZ1000B×2 door shaped welding is specially designed for the welding of H beam. It realized the combination of welding control and trolley control and can de operated. Driven by alternating current converter; stable speed, digital display of the linearity speed, good reliability, there is no three-axle mechanical tracing arc guiding mechanism; floating type tracing to guarantee that the welding torch targeting at the welding seam accurately. The power ling for the submerged arc welding can move on the portal frame to shorten the length of the control cable and the welding cable as possible to quicken the response, reduce the pressure and stabilize the welding current.

provide goods bound and compose parts

    Mail frame: include gantry, travel unit, carriage wire-feeding tube and attachments etc.

    Welding arm and its carriage including :2sets of welding arm elevating unit arm travel unit, carriage and its attachments

Flux recovery system including : 100kg flux recovery unit flux separating barrel flux hopper flux recovery and convey tube.

Welding system 2sets of Lincoln  DC1000welding machine

Welding control board and welding gun

Spare parts: 3 piece of 5A 1a fuse, 2 push bottoms 2 pieces of 10A fuse 8 pieces of wire guide.

Technique document (send out to clientele after bargain go into effect )

a, Operating manual(including electrical diagram)

b, Delivery list

c, Certificate

d, Foundation diagram

e, Inverter manual. flux recovery manual, SAW manual

Major technical parameter

Height of the flange board:                      200-800mmThickness of flange board:                          6-40mm Height of the web:                             200-1500mm

Thickness of the web:                              6-40mm

Length of the usable work piece:              4000-15000mm

Welding speed:                           240-1500mm/min

Speed of back stoke:                          3000mm/min

To-and-fro stoke of the welding arm:                 800mm

Welding position:                fillet welding at flat position

Size of the usable welding wire:                    3.2-5mm

Flux recovery machine:                     100kg×2

Machine power:                             8.2kw

Electrical system:                            Siemens