Solar Industrial Power Inverters 500W-2000W 48VDC 110VDC 220VDC

It is solar inverter , can be with solar system,
SIN series  solar Inverter SIN series Inverter which are designed based on Post,  Electric Power and railway etc,  is an uninterruptible power systems products. It adopts the advantageous technology to research and develop. Static Bypass module adopts the advantageous control strategy and high reliability SCR to switch inverter voltage and bypass voltage smoothly. DSP and modularization improve their reliability and performance,  convenient maintenance and shipment. Meanwhile it has telecommunications and expandable functions. It applies to anti-sensitive power supply equipment,  post systems,  electric power systems and railway etc.

Features Benefits:

Adopt Special Microprocessor Chip Control

Advance Intelligent  IGBT Module (IPM)

High reliability and performance,  strong impaction

LCD Display,  User-Friendly operation

RS232/485 interface meet local and remote monitor

Easy installation and conveniently assembled

Adopts Static bypass and switch to be uninterruptible

Full protections including over voltage,  low voltage,  short circuit,  overload etc)

Model	48VDC series	110VDC series	220VDC series
Nominal capacity	1KVA～10KVA	1KVA～20KVA	1KVA～80KVA
DC input
Rated voltage	48VDC	110VDC	220VDC
Input range	40～57V	90～150V	180～300V
Anti-noise current irrigation	<10%
AC input
Voltage	220V±20%
Frequency	50Hz±5%
Dynamic  features	Load current from25％to50％to75％, output voltage changes<10％ recover time<20ms
THD	<5%(linear load)
Conducted interference limits	0.15－0.5MHz, Quasi-peak<79dB, Average<66DB;0.5－30MHz, Quasi-peak<73dB average<60dB
Efficiency	>85%
Overload	When the load current is 120%, it will turn to bypass after 20s, it will be normal with the less than 100%
Bypass conversion time	less than 6ms
Noise	<50～60dB
Crest factor	3:01
Protection
Input	Over-voltage,  under-voltage protection
Over temperature	Temperature > 85℃,  automatically switch to bypass
Input short circuit	limited current or fuse, breaker protection
Failure	Automatically switch to bypass
Alarm
AC bypass power-down	buzzer calls  every 4S  ,  automatically mute after 30S
DC input undervoltage	buzzer calls  every 1S
Overload	LED will light and alarm
Failure	LED will light and alarm
LCD/LED
LCD display	show AC input/output voltage, frequency, DC input voltage, output power percentage etc
LED display	mains, working, overload, DC bias , failure
Environment
Temperature	0-40℃
Relative humidity	20%-90%(non-condensing)
Insulating resistance	500VDC, >2MΩ
Insulating intensity	1500VAC, 1Min, leakage current<10mA